background image

DESCRIPTION OF SYMBOLS

Warning 

Danger!

 - Read the operating

instructions to reduce the risk

of inquiry

 Diameter 

    

 

mA 

   Milliamperes  

 

Double insulated 

/min     Revolutions or reciprocation

 

   per minute

Ah 

   Amp hour

Nm 

   Newton Meters 

 

 

n

o      No load speed

  V 

    Volts  

 

            

 Hz 

    Hertz

ac/~      Alternating current               

 W 

    Watts

  

    Direct current 

 

dc/

Caution! Wear ear-muffs.

 

The impact of noise can cause

damage to hearing.

Caution! Wear safety goggles.

Sparks generated during working or splinters, chips and dust emitted by the

device can cause loss of sight.

Ø

Caution! Wear a breathing mask. 

Dust which is injurious to health can be

generated when working on wood and other materials. Never use the device

to work on any materials containing asbestos!

Store the battery only in dry rooms with an ambient temperature

of +10¼c to +40¼c. Place only charged batteriers in storage (charged

at least 40%)

.

Protection from environmental influences

1. Wear suitable work clothes. Wear safety goggles.
2.  Protect your cordless tool and the battery charger from moisture and rain. Moisture and rain can cause 

dangerous cell damage.

3. Do not use the cordless tool or the battery charger near vapours and inflammable liquids.

4. Use the battery charger and cordless tools only in dry conditions and an ambient temperature of 10-40°C.
5.  Do not keep the battery charger in places where the temperature is liable to reach over 40°C. In 

particular, do not leave the battery charger in a car that is parked in the sunshine.

6.  Protect batteries from overheating. Overloads, over-charging and exposure to direct sunlight will result in 

overheating and cell damage. Never charge or work with batteries which have been overheated – replace 

them immediately if possible.

7.  

Storage of batteries, battery chargers and cordless tools.

 Store the charger and your cordless tool 

only in dry places with an ambient temperature of 10-40°C. Store your lithium-ion battery pack in a cool, 

dry place at a temperature of 10-20°C. Protect them from humidity and direct sunlight. Only place fully 

charged batteries in storage (charged at least 40%).

8.  Prevent the lithium-ion battery pack from freezing. Battery packs which were stored below 0°C for more 

than 60 minutes must be disposed of.

9.  When handling batteries beware of electrostatic charge: Electrostatic discharges cause damage of 

the electronic protection system and the battery cells. Avoid electrostatic charging and never touch the 

battery poles

Rechargeable batteries and cordless electric machines and tools contain materials that are potentially 

harmful to the environment. Never place any cordless electric machines or tools in your household refuse. 

When cordless electric machines or tools become defective or worn, remove the rechargeable batteries 

and return them to
iSC GmbH (address: Eschenstrasse 6, D-94405, Germany). If the rechargeable batteries cannot be 

removed, return the complete cordless machine or tool.

You can then be sure that the equipment will be correctly disposed of by the manufacturer.

When shipping or disposing of batteries and cordless tools, always ensure that they are packed 

individually in plastic bags to prevent short circuits and fires.

Do not lose these safety instructions

.

For EU countries only

Never place any electric power tools in your household refuse.

To comply with European Directive 2012/19/EC concerning old electric and electronic equip-

ment and its implementation in national laws, old electric power tools have to be separated 

from other waste and disposed of in an environment-friendly fashion, e.g. by taking to a 

recycling depot.

Recycling alternative to the return request: As an alternative to returning the equipment to the 

manufacturer, the owner of the electrical equipment must make sure that the equipment is 

properly disposed of if he no longer wants to keep the equipment. The old equipment can be 

returned to a suitable collection point that will dispose of the equipment in accordance with 

the national recycling and waste disposal regulations. This does not apply to any accessories or 

aids without electrical components supplied with the old equipment.

This consignment contains lithium-ion batteries.

In accordance with special provision 188 this consignment is not subject to the ADR regula-

tions. Handle with care. Danger of ignition in case of damage to the consignment package. If 

the consignment package is damaged: Check and if necessary repackage. For further informa-

tion contact: 0049 1807 10 20 20 66 (fixed network 14 ct/min, mobile phone max. 42 ct/min) 

Outside Germany charges will apply instead for a regular call to a landline number in Germany.

Danger!

Sound and vibration

Sound and vibration values were measured in accordance with EN 60745.

L

PA

 

sound pressure level ..............................73.9 dB(A)

K

PA

 uncertainty

 ....................................................3 dB

L

wA

 sound power level ..................................84.9 dB(A)

K

wA 

 uncertainty ...................................................

3 dB

Wear ear-muffs.

The impact of noise can cause damage to hearing.

Total vibration values (vector sum of three directions) determined in accordance with 

EN 60745.

Vibration emission value a

h

 = 21.251 m/s

²

K uncertainty = 1.5 m/s

²

The specified vibration value was established in accordance with a standardized testing 

method. It may change according to how the electric equipment is used and may exceed 

the specified value in exceptional circumstances.

The specified vibration value can be used to compare the equipment with other electric 

power tools.

The specified vibration value can be used for initial assessment of a harmful effect.

Keep the noise emissions and vibrations to a minimum.

• Only use appliances which are in perfect working. order.

• Service and clean the appliance regularly.

• Adapt your working style to suit the appliance.

• Do not overload the appliance.

• Have the appliance serviced whenever necessary.

• Switch the appliance off when it is not in use.

• Wear protective gloves.

Caution!

Residual risks

Even if you use this electric power tool in accordance with 

instructions, certain residual risks cannot be rules out. The 

following hazards may arise in connection with the equipment’s 

construction and layout:

1. Lung damage if no suitable protective dust mask is used.

2. Damage to hearing if no suitable ear protection is used.

3.  Health damage caused by hand-arm vibrations if the equipment is used over a 

prolonged period or is not properly guided and maintained.

TECHNICAL DATA

Warning 

Danger!

 - Read the operating

instructions to reduce the risk

of inquiry

 Diameter 

    

 

mA 

   Milliamperes  

 

Double insulated 

/min     Revolutions or reciprocation

 

   per minute

Ah 

   Amp hour

Nm 

   Newton Meters 

 

 

n

o      No load speed

  V 

    Volts  

 

            

 Hz 

    Hertz

ac/~      Alternating current               

 W 

    Watts

  

    Direct current 

 

dc/

Caution! Wear ear-muffs.

 

The impact of noise can cause

damage to hearing.

Caution! Wear safety goggles.

Sparks generated during working or splinters, chips and dust emitted by the

device can cause loss of sight.

Ø

Caution! Wear a breathing mask. 

Dust which is injurious to health can be

generated when working on wood and other materials. Never use the device

to work on any materials containing asbestos!

Store the battery only in dry rooms with an ambient temperature

of +10¼c to +40¼c. Place only charged batteriers in storage (charged

at least 40%)

.

SPARE PARTS

Spare parts can be ordered from the Special Orders Desk at your local 

Bunnings Warehouse or Homebase store. 

For further information, or any parts visit  

www.ozito-diy.co.uk or contact Ozito Customer Service: 

Great Britain: 0151 294 4488 

Ireland: 1850 882711 

E-mail: [email protected]

Summary of Contents for PXCPRSK-218U









Reviews: