KNOW YOUR PRODUCT
SETUP & PREPARATION
1. ASSEMBLY
1. Chain
2. Guide Bar
3. Oil Cap
4. Side Cover
5. Pivoting Pruner Head Release
6. Telescopic Tube Lock
7. Main Tube
8. Auxiliary Handle
9. Shoulder Strap Holder
10. Assembly Nut
11. Pivoting Handle Release
12. Rear Handle
13. Chain Cover Lock
14. Chain Tension Adjustment Dial
15. Switch Lock
16. Auxiliary Handle Lever
17. Trigger Switch
18. Battery Seating
19. Mounting Attachment Lever
CORDLESS POLE PRUNER
1
2
3
4
5
6
7
8
ONLINE MANUAL
Scan this QR Code with your mobile device to take you to
the online manual.
15
16
10
11
12
13
14
9
17 18 19
BATTERY & CHARGER
(sold separately)
This tool is compatible with all battery and chargers from
the Ozito Power X Change Range.
For example: Batteries PXBP-200U (2Ah / 18V) &
PXBP-400U (4Ah / 18V). Charger: PXCG-030U (18V).
CAUTION:
ENSURE THE TOOL IS OFF & THE BATTERY
REMOVED BEFORE PERFORMING ANY OF THE FOLLOWING
OPERATIONS.
Fitting Rear Handle
1. Push the rear handle fully
onto tube aligning the
internal prongs.
2. Screw tight with
the assembly nut.
Fitting Auxiliary Handle
1. Place the Auxiliary Handle onto
the mounting attachment.
2. Pass the bolt through the auxiliary handle and screw the lever to the end
of the bolt.
3. Select the most comfortable
position and close the lever
to lock the auxiliary handle in
position.
