manualshive.com logo in svg

Ozito PXCPPHTC-418, Instruction Manual, Page: 11 / 16

Share
Download
Ozito PXCPPHTC-418 Instruction Manual Download Page 11

2.  BATTERY & CHARGING

CAUTION:

 

THE CHARGER FOR THIS PRODUCT 

SHOULD BE PROTECTED BY A RESIDUAL CURRENT 

DEVICE (RATED AT 30mA OR LESS).

The purchased battery will be shipped in a low charge condition, and requires charging 
prior to use. Allow several cycles of charging and discharging (through use of the tool) 
for the battery to reach its optimum performance / runtime.

1.    Connect the charger into a mains power outlet.

4.  The charger LED will illuminate 

red signifying that the battery is 

charging.

3.   With the charger sitting on a flat 

surface, align the raised ribs on 

the battery with the recess in the 

charger and slide onto the charger 

ensuring a firm connection.

2.   The charger LED will flash green 

showing power is being supplied 

to the charger.

5.  The charger LED will illuminate 

green once the battery is fully 

charged.

Charging your lithium ion battery - Fast Charger

Charger LED Indicator 

LED Indicator 

Situation

GREEN (Flashing) 

Stand By (no battery pack is inserted) 

RED (Flashing)

Battery is charging (low charge)

RED (Illuminated)

Battery is charging (mid charge)

GREEN (Illuminated)

Battery is fully charged

BOTH(Illuminated)

Battery pack is too hot or too cold (charging will begin 
automatically when battery reaches correct charging 
temperature).

BOTH (Flashing)

Defective battery. Never charge a defective battery 
pack!
Remove battery pack from charger.

Note:

  

The Lock Button will “CLICK” back to the left (original position) when 

the trimmer head is correctly secured in place.

CAUTION:

 

THE BLADE HAS SHARP EDGES. FOR YOUR OWN 

SAFETY, PLEASE WEAR WORK GLOVES.

Fitting Trimmer Head

1.   Align the Trimmer head 

and the motor head so the 

arrows on both coincide.

2.    (a) Press the trimmer head 

against the motor head. 

This will cause the lock 

button to be pushed to the 

right.

    (b) Turn the trimmer head 

clockwise. The trimmer 

head will lock onto the 

motor head and is then 

secured in place. 

Lock Button

a

b

Removing Trimmer Head

Motor Head

a

b

1.    (a) Pull and hold the Lock 

Button to the right. 

    (b) Turn the Trimmer 

Head anti-clockwise so 

the arrows on the Motor 

Head and the Trimmer 

Head coincide, allowing 

the Trimmer Head to be 

removed.

Summary of Contents for PXCPPHTC-418

















Reviews:

No comments