4. MOWING
3. CONTROLS
OPERATION
1. Press and hold the lock-off
button.
3. Release the start/stop lever to
stop the mower.
To prevent accidental start up, the mower is fitted with a dual action switch.
2. Pull the start/stop lever towards
the handle to start the mower
and then release the lock-off
button.
Switching On and Off
Adjusting the Cutting Height
1
2
PXCLMS-018
• While using your lawn mower always wear substantial closed, heavy
footwear and long trousers.
• Make sure the lawn is clear of sticks, stones, wire and debris; they could
be thrown by the blade.
• Before using the lawn mower and after any impact, check for signs of
wear or damage and repair as necessary.
• Replace a worn or damaged blade together with the blade bolt to
preserve balance.
IMPORTANT!
DO NOT MOW WITH POOR VISIBILITY
CONDITIONS, IN THE RAIN OR WHEN GRASS IS
WET.
Start mowing the edge of the
lawn and work along making sure
to overlap each pass by a few
centimetres.
For optimum grass collection, always
mow in a straight line; do not swing
the lawn mower from side to side.
When mowing long grass be sure to
not overload the motor. First cut with
the highest cutting height and then
to the desired height. This will help
reduce the load.
Lawn Mowing Tips
To obtain the desired cutting height, the front and rear axles are repositioned
on the underside of the mower housing.
1. Place the mower on its side.
2. Pull the wheel axle towards the
front of the mower.
3. Locate the wheel axle into the
desired cutting height adjustment
position.
Note:
Make sure that front, back, left & right wheels are located in the
same cutting height adjustment position.
Cutting Height Positions
1
2
3
1 - 30mm (lowest).
2 - 50mm.
3 - 70mm (highest).
