ONLINE MANUAL
Scan this QR Code with your mobile
device to take you to the online manual.
BATTERY & CHARGER (sold separately)
This tool is compatible with all battery and chargers from
the Ozito Power X Change Range.
KNOW YOUR PRODUCT
1. ASSEMBLY
SETUP & PREPARATION
The blade cover protects the blade
when not in use. Simply slide it
off the blade before use. Once
finished operating, place the cover
back over the blade.
Ensure the safety guard
is fitted securely onto the
hedge trimmer before use.
Tighten the screws on either
side if necessary.
Blade Cover
Safety Guard
WARNING!
ENSURE THE TOOL IS SWITCHED
OFF AND BATTERY DISCONNECTED BEFORE
PERFORMING ANY OF THE FOLLOWING TASKS.
WARNING!
NEVER USE THE HEDGE TRIMMING
UNLESS THE SAFETY GUARD IS FITTED.
WARNING!
NEVER START THE HEDGE TRIMMER
WHILE THE BLADE COVER IS FITTED.
ACCESSORIES
1 2 3 4 5 6
7
8
1 Impact Guard
2 Blade
3 Safety Guard
4 Front Handle
5 Safety Switch
6 On/Off Trigger
7 Rear Handle
CORDLESS HEDGE TRIMMER
8 Blade Cover
WARNING!
WHEN HANDLING THE BLADE ASSEMBLY,
WEAR NON-SLIP, HEAVY-DUTY PROTECTIVE GLOVES.
DO NOT PLACE YOUR HAND OR FINGERS BETWEEN
BLADES OR IN ANY POSITION WHERE THEY COULD
GET PINCHED OR CUT. NEVER TOUCH BLADES
OR SERVICE THE UNIT WITH THE BATTERY PACK
INSTALLED.
