ONLINE MANUAL
Scan this QR Code with your mobile
device to take you to the online manual.
KNOW YOUR PRODUCT
1. CHANGING BLADES
SETUP & PREPARATION
1. Slide the back of the
blade base into the
recess in the housing.
Inserting the Blade Base
Remove the Blade Base
WARNING!
ENSURE THE TOOL IS SWITCHED
OFF AND BATTERY DISCONNECTED BEFORE
PERFORMING ANY OF THE FOLLOWING STEPS.
WEAR GLOVES, BLADES ARE SHARP.
ACCESSORIES
1 2 3 4 5 6
7 8
1. Base Release Button
2. Removable Base
3. Safety Switch
4. On/Off Trigger
5. Sure Grip Handle
6. Battery Seating
CORDLESS TRIMMER/SHEAR
7. Hedge Trimmer Blade
8. Grass Shear Blade
9. Blade Covers
2. Push the front of the
blade base into the
housing until it clicks
into place.
1. Press and hold the base
release button.
2. Remove the base by
lifting from the front and
then sliding out.
9
Note:
Ensure the base is supported by hand when the release button is
pressed to prevent it falling unexpectedly.
