background image

  

Wear safety goggles

WARNING - To reduce the risk 

of injury, user must read

instruction manual

Never expose the device to rain

Always hold the saw with both hands

Wear ear protectors

Maximum cutting length / chain speed

Unlock chain brake before putting into operation!

Store the battery only in dry rooms with anambient temperature

of +10

°

C to +40

°

C. Place only charged batteries in storage

(charged at least 40%).

Unlock chain brake before putting into operation!

DESCRIPTION OF SYMBOLS

Mayr/Product-Management

Weichselgartner/General-Manager

- 135 -

explains the following conformity according to EU directives and norms for 

the following product

Cordless Chain Saw PXCCSS-018U / Fast Charger PXCG-030U (Ozito)

 2014/29/EU 
 2005/32/EC_2009/125/EC 
 2014/35/EU 
 2006/28/EC 

X

 2014/30/EU 
 2014/32/EU 
 2014/53/EC 
 2014/68/EU 
 90/396/EC_2009/142/EC 
 89/686/EC_96/58/EC 

X

 2011/65/EU

X

 2006/42/EC

X

 Annex IV

Notified Body: TÜV SÜD Product Service GmbH - Riedlerstr. 65 - D-80339 München 

                          Germany

Notified Body No.:  0123

Reg. No.:  M6A 16 10 24192 01748

X

 2000/14/EC_2005/88/EC

X

 Annex V

 Annex VI

Noise: measured L

WA

 = 95,4 dB (A); guaranteed L

WA

 =  98 dB (A)

P =  KW; L/Ø =  cm

Notified Body: TÜV SÜD (0123)

 2012/46/EU 

Emission No.:

Standard references:  EN 60745-1; EN 60745-2-13; EN 55014-1; EN 55014-2;  

EN 61000-3-2; EN 61000-3-3; EN 60335-1; EN 60335-2-29; EN 62233; EN 62321

Landau/Isar, den 28.09.2016

First CE: 16  

 

Archive-File/Record: NAPR015299

Art.-No.: 45.017.59 

I.-No.: 11016 

Documents registrar: R. Gehard

Subject to change without notice 

Wiesenweg 22, D-94405 Landau/Isar

ISC GmbH · Eschenstraße 6 · D-94405 Landau/Isar

EG_Erkl_PXCCSS_018U.indd   135

16.11.2016   08:35:54

DECLARATION OF CONFORMITY

ADDITIONAL INFORMATION

Danger!
Sound and vibration

Sound and vibration values were measured in accordance with EN 60745-1 and 

EN 60745-2-13.
LpA sound pressure level ..................... 85,7 dB(A)
KpA uncertainty .............................................3 dB
LWA sound power level ....................... 95,4 dB(A)
KWA uncertainty ........................................2,47 dB
LWA sound power level guaranteed ......... 98 dB(A)

Wear ear-muffs.

The impact of noise can cause damage to hearing.
Total vibration values (vector sum of three directions) were determined in accordance 

with EN 60745-1 and EN 60745-2-13.

Handle under load

Vibration emission value front handle
ah = 4,88 m/s

2

Vibration emission value rear handle
ah = 4 m/s

2

K uncertainty = 1.5 m/s

2

The specified vibration value was established in accordance with a standardized testing 

method. It may change according to how the electric equipment is used and may exceed 

the specifi ed value in exceptional circumstances.
The specified vibration value can be used to compare the equipment with other electric 

power tools.
The specified vibration value can be used for initial assessment of a harmful effect.

Keep the noise emissions and vibrations to a minimum.

•   Only use appliances which are in perfect working order.
•   Service and clean the appliance regularly.
•   Adapt your working style to suit the appliance.
•   Do not overload the appliance.
•   Have the appliance serviced whenever necessary.
•   Switch the appliance off when it is not in use.
•   Wear protective gloves.

For EU countries only
Never place any electric power tools in your household refuse.
To comply with European Directive 2012/19/EC concerning old electric and electronic 

equipment and its implementation in national laws, old electric power tools have to be 

separated from other waste and disposed of in an environment-friendly fashion, e.g. by 

taking to a recycling depot.

Recycling alternative to the return request:
As an alternative to returning the equipment to the manufacturer, the owner of the 

electrical equipment must make sure that the equipment is properly disposed of if he no 

longer wants to keep the equipment. The old equipment can be returned to a suitable 

collection point that will dispose of the equipment in accordance with the national 

recycling and waste disposal regulations. This does not apply to any accessories or aids 

without electrical components supplied with the old equipment.

The reprinting or reproduction by any other means, in whole or in part, of documentation 

and papers accompanying products is permitted only with the express consent of the iSC 

GmbH.

Subject to technical changes

This consignment contains lithium-ion batteries.
In accordance with special provision 188 this consignment is not subject to the ADR 

regulations. Handle with care. Danger of ignition in case of damage to the consignment 

package. If the consignment package is damaged: Check and if necessary repackage. 

For further information contact: 0049 1807 10 20 20 66 (fi xed network 14 ct/min, mobile 

phone max. 42 ct/min) Outside Germany charges will apply instead for a regular call to a 

landline number in Germany.

Summary of Contents for PXCCSS-018U











Reviews: