ONLINE MANUAL
Scan this QR Code with your
mobile device to take you to
the online manual.
ACCESSORIES
CORDLESS GRASS TRIMMER
KNOW YOUR PRODUCT
1
10
2
11
3
12
4
13
5
6
7
8
9
15
14
16 17
19
18
1. ASSEMBLY
SETUP & PREPARATION
1 Extend the edging guide to
allow the safety guard to
go over the spindle.
3 Slide in until it clicks into
place.
2 Align the tabs of the
safety guard with
the recess in the
back of the cutter
head.
Fitting the Safety Guard
WARNING!
ENSURE THE TOOL IS SWITCHED OFF AND
BATTERY DISCONNECTED BEFORE PERFORMING ANY
OF THE FOLLOWING TASKS.
WARNING!
NEVER USE THE GRASS TRIMMER UNLESS
THE SAFETY GUARD IS PROPERLY FITTED.
1 Telescopic Shaft
2 Shaft Adjustment Collar
3 Adjustable Handle Lever
4 Adjustable Handle
5 Lock-off Switch
6 Rear Handle
7 On/Off Trigger
8 Battery Seating
9 Head Tilt Button
10 Edging Guide
11 Cutter Head
12 Safety Guard
13 Cutting Blade
14 Blades
15 Battery Release Tab
16 Charge Indicator Button
17 Battery
18 Battery Charger
19 Battery Charger LED
Fitting the Adjustable Handle
1 Fit the handle mounting
bracket onto the upper
section of the shaft.
Note:
You will need to carefully
flex the mounting bracket just
enough to slip over the shaft.
Do not over flex as this can
damage or break the mounting
bracket.
2 Place the adjustable handle
on the mounting bracket,
then pass the screw
with washer through the
mounting bracket and onto
the adjustable handle lever.
