3. CONTROLS & OPERATION
2. INSERTING & REMOVING THE BATTERIES
OPERATION
1. Align the ribs of the battery with
the recess in the jet blower.
1. Press and hold the battery
release tab to release the
battery.
2. Slide the battery in so
that it clicks into place.
1. Squeeze the on/off trigger to
start. Motor will start after
short delay.
2. To stop operation, release the
on/off trigger.
2. Slide the battery out.
Inserting the Battery Pack
Removing a Battery from the Jet Blower
Switching On and Off
WARNING!:
DO NOT SWITCH THE JET BLOWER ON
IN ENCLOSED OR POORLY VENTILATED SPACES
OR IN THE PRESENCE OF FLAMMABLE AND/OR
EXPLOSIVE LIQUIDS, GASES AND POWDERS.
1. To increase the air speed
rotate the dial to the
“MAX”setting.
2. To lower the air speed
rotate the dial to the
“MIN” setting.
Variable Speed Dial
1. Press Turbo Boost Button
for maximum air speed.
Turbo Boost Button
2. Release button to return
to normal air speed.
Note:
Always use 2 batteries of the same capacity and same charge
state with the jet blower. Turbo boost button is only operational with 3.0Ah
batteries and above.
Note:
Always use the speed which is actually required and never run at a
speed which is faster than necessary.
Note:
To reduce noise and prolong battery operating time, never actuate the
turbo speed button longer than necessary.
Note:
Turbo boost button is only operational with 3.0Ah batteries and above.