Battery Charge Indicator
The purchased battery is equipped with a
battery charge indicator to show the state of
the battery charge.
Press the charge indicator button and look to
see which LED lights.
Battery requires
immediate charging
Low state of charge, requires charging soon.
Mid state of charge
Full state of charge.
Note:
The battery needs to be removed from the tool to check the state of charge.
1 Connect the charger into a mains power outlet.
4 The charger LED will illuminate red signifying that the battery is charging.
3 With the battery sitting on a flat
surface, align the raised ribs on the
battery with the recess in the charger
and slide onto the battery ensuring a
firm connection.
2 The charger LED will flash green
showing power is being supplied
to the charger.
5 When removing the charger from the
battery, first press the battery release
tab, then slide the charger from its
position.
Charging your lithium ion battery - Eco Charger
Charger LED Indicator
LED Indicator
Situation
GREEN (Flashing)
Stand By (no battery pack is inserted)
RED (Illuminated)
Battery is charging (low charge)
GREEN (Illuminated)
Battery is Charged and ready for use
RED (Flashing)
Battery or Charger fault
RED & GREEN (Flashing)
Battery pack is too hot or too cold (remove battery from
charger and store at room temperature 20ºC. Insert
battery again when at correct charging temperature). If
this happens again, the battery is defective and needs
to be replaced.
OPERATION
1 To turn on, slide the lock-on
switch across to the right and
then forward.
1 Ensure the workpiece is securely
held down.
2 To turn off, slide the lock-on
switch back and to the left.
2 Hold the angle grinder
firmly with both handles
and switch on.
3 Begin grinding your workpiece. The optimum grinding angle is 10-15
0
to
the workpiece.
Note:
Do not apply excessive pressure. Allow the tool to do the work, this
will prevent deep gouging.
10-15
0
4. GRINDING
Turning On and Off
Grinding Procedure
PXAGS-500U
