background image

When not in use, the tool should be stored in a dry, frost free location. Keep 

out of children’s reach.

If the housing of the tool requires cleaning, do not use solvents. Use of a 

cloth only is recommended. Never immerse any part of the tool into liquid.

Note: 

Ozito Industries will not be responsible for any damage or injuries 

caused by repair of the device by an unauthorised person or by mishandling.

WARNING! 

BEFORE CLEANING OR CARRYING OUT 

ANY MAINTENANCE PROCEDURE, ENSURE THAT 
THE BATTERIES HAVE BEEN REMOVED & THE 
POWER CORD UNPLUGGED.

DESCRIPTION OF SYMBOLS

Warning

Read instruction manual

Regulatory Compliance Mark (RCM)

Power tools that are no longer usable should not be disposed 

of with household waste but in an environmentally friendly 

way. Please recycle where facilities exist. Check with your local 

council authority for recycling advice.

Recycling packaging reduces the need for landfill and raw 

materials. Reuse of recycled material decreases pollution in the 

environment. Please recycle packaging where facilities exist. 

Check with your local council authority for recycling advice.

CARING FOR THE ENVIRONMENT

SPARE PARTS

Spare parts can be ordered from the Special Orders 

Desk at your local Bunnings Warehouse. 
For further information, or any parts not listed here, 
visit www.ozito.com.au or contact Ozito Customer 
Service: 
Australia 1800 069 486 
New Zealand 0508 069 486 
E-mail: [email protected]

MAINTENANCE

Summary of Contents for Power XChange PXWLS-2000











Reviews: