KNOW YOUR PRODUCT
SETUP & PREPARATION
1. BATTERY & CHARGING
(sold separately)
1 SDS+ Accessory Holder
2 Accessory Locking Sleeve
3 Mode Selector
4 Front Handle
5 LED Worklight
6 Variable Speed trigger
7 Forward/Reverse Lever
8 Sure Grip Rear Handle
CORDLESS ROTARY HAMMER DRILL
The purchased battery will be shipped in a low charge condition, and requires charging
prior to use. Allow several cycles of charging and discharging (through use of the tool)
for the battery to reach its optimum performance / runtime.
1 Connect the charger into a mains power outlet.
4 The charger LED will illuminate
red signifying that the battery is
charging.
3 With the charger sitting on a flat
surface, align the raised ribs on
the battery with the recess in the
charger and slide onto the charger
ensuring a firm connection.
2 The charger LED will flash green
showing power is being supplied
to the charger.
5 The charger LED will illuminate
green once the battery is fully
charged.
Charging your lithium ion battery - Fast Charger
Charger LED Indicator
LED Indicator
Situation
GREEN (Flashing)
Stand By (no battery pack is inserted)
RED (Flashing)
Battery is charging (low charge)
RED (Illuminated)
Battery is charging (mid charge)
GREEN (Illuminated)
Battery is fully charged
BOTH(Illuminated)
Battery pack is too hot or too cold (charging will begin
automatically when battery reaches correct charging
temperature).
BOTH (Flashing)
Defective battery. Never charge a defective battery
pack!
Remove battery pack from charger.
1 2 3 4 5
6 7 8
CAUTION:
THE CHARGER FOR THIS PRODUCT
SHOULD BE PROTECTED BY A RESIDUAL CURRENT
DEVICE (RATED AT 30mA OR LESS).
ONLINE MANUAL
Scan this QR Code with your
mobile device to take you to the
online manual.
BATTERY & CHARGER (sold separately)
This tool is compatible with all battery and chargers from the Ozito
Power X Change Range.
