background image

SPECIFICATIONS

Input:  

18V

Chuck Size:   

13mm Single Sleeve

No Load Speed: 

0-350 / 0-1,250/min

Torque Setting: 

18

Max. Torque: 

36Nm

Weight (Tool Only): 

1.1kg

CORDLESS

DRILL DRIVER

ORIGINAL INSTRUCTIONS

ozito-diy.co.uk

PXDDGK-600U

WHAT’S IN THE BOX

Cordless Drill Driver

WARRANTY

OZITO UK

 

Unit 9 Stadium Court, Wirral International Business Park, Plantation Road, Bromborough, Wirral, CH62 3QG

0516

All of our products undergo strict quality checks to ensure that they reach you in perfect 

condition. In the unlikely event that your device develops a fault, please contact our service 

department at the address shown on this guarantee card. You can also contact us by 

telephone using the customer service number shown. Please note the following terms under 

which guarantee claims can be made:

1. These warranty terms regulate additional warranty services, which the manufacturer 

mentioned below promises to buyers of its new products in addition to their statutory 

guarantee claims are not affected by this guarantee. Our guarantee is free of charge to you.

2. The warranty services only covers defects due to material or manufacturing faults on 

a product which you have bought from the manufacturer mentioned below are limited to 

either the rectification of said defects on the product or the replacement of the product, 

whichever we prefer. 

Please note that our devices are not designed for use in commercial, trade or professional 

applications. A guarantee contract will not be created if the device has been used by 

commercial, trade or industrial business or has been exposed to similar stresses during the 

guarantee period.

3. The following are not covered by our guarantee: 

- Damage to the device caused by a failure to follow the assembly instructions or due to 

incorrect installation, a failure to follow the operating instructions (for example connecting 

it to an incorrect mains voltage or current type) or a failure to follow the maintenance and 

safety instructions or by exposing the device to abnormal environmental conditions or by 

lack of care and maintenance. 

- Damage to the device caused by abuse or incorrect use (for example overloading the 

device or the use or unapproved tools or accessories), ingress of foreign bodies into the 

device (such as sand, stones or dust, transport damage), the use of force or damage caused 

by external forces (for example by dropping it). 

- Damage to the device or parts of the device caused by normal or natural wear or tear or by 

normal use of the device.

4. Your Product is guaranteed for a period of 60 months from the original date of purchase 

and is intended for DIY (Do It Yourself) use only. Lithium Ion batteries and chargers are 

covered by a 12 month warranty. Warranty excludes consumable parts. Guarantee claims 

should be submitted before the end of the guarantee period within two weeks of the defect 

being noticed. No guarantee claims will be accepted after the end of the guarantee period. 

The original guarantee period remains applicable to the device even if repairs are carried 

out or parts are replaced. In such cases, the work performed or parts fitted will not result 

in an extension of the guarantee period, and no new guarantee will become active for the 

work performed or parts fitted. This also applies if an on-site service is used. 

IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY YOU MUST RETURN THE PRODUCT TO 

THE PLACE OF PURCHASE WITH YOUR REGISTER RECEIPT.

Please refer to the restrictions of this warranty concerning wearing parts, consumables and 

missing parts as set out in the service information in these operating instructions. 

CUSTOMER SERVICE HELPLINE 

GB: 0151 294 4488 

IRL: 1850 882711 

Ozito-diy.co.uk

Summary of Contents for Power Xchange PXDDGK-600U

































Reviews: