ONLINE MANUAL
Scan this QR Code with your mobile
device to take you to the online
manual.
Fitting the Adjustable Handle
1. Fit the handle mounting bracket
onto the upper section of the shaft.
Note:
You will need to carefully flex
the mounting bracket just enough to
slip over the shaft. Do not over flex as
this can damage or break the mounting
bracket.
2. Place the adjustable handle on
the mounting bracket, then pass
the screw with washer through
the mounting bracket and onto the
adjustable handle lever.
14 15 16
17 18
KNOW YOUR PRODUCT
1. ASSEMBLY
SETUP & PREPARATION
WARNING!
ENSURE THE TOOL IS SWITCHED
OFF AND BATTERY DISCONNECTED BEFORE
PERFORMING ANY OF THE FOLLOWING TASKS.
CORDLESS GRASS TRIMMER
1
10
2
11
3
12
4
13
5
6
7
8
9
1. Telescopic Shaft
2. Shaft Adjustment Collar
3. Adjustable Handle Lever
4. Adjustable Handle
5. Lock-off Switch
6. Sure Grip Handle
7. On/Off Trigger
8. Battery Seating
9. Head Tilt Button
10. Edging Guide
11. Cutter Head
12. Safety Guard
13. Cutting Blade
ACCESSORIES
19
14. Battery Release Tab
15. Battery Charge LED’s
16. Battery Charge Indicator Button
17. Charger LED’s
18. Charger
19. Blades x 10
Fitting the Safety Guard
Note:
The Safety Guard can only be
fitted before the Spindle Plate.
1. Align the tabs of the safety guard
with the recess in the back of the
cutter head.
1. Place the Spindle Plate onto the
spindle and secure in place with
screw provided.
2. Slide in until it clicks
into place.
WARNING!
NEVER USE THE GRASS TRIMMER
UNLESS THE SAFETY GUARD IS PROPERLY FITTED.
Fitting the Spindle Plate
