manualshive.com logo in svg

Ozito Power X Change PXBDS-220, Instruction Manual

Share
Download
Ozito Power X Change PXBDS-220 Instruction Manual Download Page 10

BATTERY CHARGE INDICATOR

The purchased battery is equipped with a 
battery charge indicator to show the state of 
the battery charge.
Press the charge indicator button and look to 
see which LED lights.

Battery requires immediate charging

Low state of charge, requires charging soon.

Mid state of charge

Full state of charge.

Note:

 The battery needs to be removed from the tool to check the state of charge. 

BATTERY PROTECTION SYSTEM

The tool is equipped with a battery protection system, which helps to ensure longevity 
of the battery.
The output power automatically cuts off during operation when the tool and/or battery 
are placed under the following situations: 

•   When the tool is overloaded:    

   If this occurs, release the trigger switch and remove causes of overload, then pull 

the switch trigger again to restart. 

•   When the remaining battery capacity becomes low: 

  Recharge the battery pack.

Note:

  The battery protection system does not in any way damage the tool.

Note:

  The indicated capacity may be lower than the actual level during use or 

immediately after using the tool.

PXBP-150

1.  OPERATION

WARRANTY

IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY YOU 

MUST RETURN THE PRODUCT TO YOUR NEAREST BUNNINGS 

WAREHOUSE WITH YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO 

RETURNING YOUR PRODUCT FOR WARRANTY PLEASE TELEPHONE 

OUR CUSTOMER SERVICE HELPLINE:

Australia 1800 069 486

New Zealand 0508 069 486

TO ENSURE A SPEEDY RESPONSE PLEASE HAVE THE MODEL 

NUMBER AND DATE OF PURCHASE AVAILABLE. A CUSTOMER 

SERVICE REPRESENTATIVE WILL TAKE YOUR CALL AND 

ANSWER ANY QUESTIONS YOU MAY HAVE RELATING TO THE 

WARRANTY POLICY OR PROCEDURE.

The benefits provided under this warranty are in addition to other rights and remedies 
which are available to you at law.
Our goods come with guarantees that cannot be excluded at law. You are entitled to a 
replacement or refund for a major failure and for compensation for any other reasonably 
foreseeable loss or damage. You are also entitled to have the goods repaired or replaced 
if the goods fail to be of acceptable quality and the failure does not amount to a major 
failure. 
Generally you will be responsible for all costs associated with a claim under this 
warranty, however, where you have suffered any additional direct loss as a result of a 
defective product you may be able to claim such expenses by contacting our customer 
service helpline above.

36 MONTH REPLACEMENT WARRANTY

Your product is guaranteed for a period of 

36 months from the original date of purchase 

and 

is

 

intended for DIY (Do It Yourself) use only.

 

If a product is defective it will be replaced in 

accordance with the terms of this warranty. Warranty excludes consumable parts.

WARNING

The following actions will result in the warranty being void.

•   If the tool has been operated on a supply voltage other than that specified on the 

tool.

•   If the tool shows signs of damage or defects caused by or resulting from abuse, 

accidents or alterations.

•   Failure to perform maintenance as set out within the instruction manual.
•   If the tool is disassembled or tampered with in any way.

OZITO 

Australia/New Zealand (Head Office)

 

1-23 Letcon Drive, Bangholme, Victoria, Australia 3175.

CHARGING YOUR LITHIUM ION BATTERY

This battery has been shipped in a low charge condition, and requires charging prior to 
use. Allow several cycles of charging and discharging (through use with a compatible 
tool) for the battery to reach its optimum performance / runtime.
This battery is compatible with chargers from the 18V Ozito Power X Change range 
available through your local Bunnings Warehouse: Product availability may differ.

•  

PXMBC-002 Multi Battery Charger

•  

PXCG-030 Fast Charger

•  

PXCG-060 Standard Charger

•  

PXCG-120 Eco Charger

Only use the battery pack with Ozito Power X Change 18V cordless products.

1. 

Insert the power plug of the charger into the mains socket outlet. The green LED 

will begin to flash when properly connected to power supply.

2. 

Insert the battery pack into the battery charger .

3. 

Remove battery from the charger once fully charged. Disconnect the charger from 

the power supply.

Note: 

The battery pack can become a little warm during the charging. This is normal

If the battery pack fails to charge, check:

 

if there is voltage at the socket outlet

 

that the battery and charger are properly connected.

If the battery pack still fails to charge, please contact our customer service center.

ONLINE MANUAL

Scan this QR Code with your mobile 

device to take you to the online 

manual.

0318

Summary of Contents for Power X Change PXBDS-220













Reviews:

No comments

Brands by name

Popular brands

Load more brands