10
Wet Grinder Operation
Ensure the wet & dry bench grinder is switch off.
Fill the water trough (14) with clean water to a level just below the top edge of the
water trough (14).
Switch the tool on.
The wet sharpening wheel (15) turns slower than the dry grinder wheel. Because
the the wet sharpening wheel (15) is water cooled and runs slower, it will produce
a fine edge on the implement being sharpened without the risk of burning the
material.
Tools to be sharpened can either be sharpened free-hand or by using the notches
on the edges of the water trough (14) as a guide.
Wheel Dressing
Dressing a wheel is done to renew sharpness or to true up the face of a wheel.
A build up of metals and dirt will become embedded in a wheel as it is used. Use
a wheel dressing tool (not supplied) to clean wheels. In so doing, it will also
improve the wet & dry bench grinder’s performance.
Note:
New wheels sometimes require dressing to true up their face.
Cleaning and Lubrication
Use only mild soap and a damp cloth to clean the tool. Never let any liquid get
inside the tool; never immerse any part of the tool into a liquid. Self lubricating
bearings are used in the tool and periodic lubrication is not required.
Note:
Ozito Industries will not be responsible for any damage or injuries caused
by repairing of the bench grinder by an unauthorised person or by mishandling of
the tool.
Please contact your local Bunnings Special Orders Desk to order the required
spare parts.
Most common spare parts listed below
Spare Part
Part No.
Wet Stone Wheel 200x40x20mm80G
SPOZWDBG250-04
Eye Shield & Bracket Assembly
SPOZWDBG250-51
OPERATION (cont.)
MAINTENANCE
SPARE PARTS
