MAINTENANCE
10
Warning!
Always disconnect the shredder from the power supply before
performing any maintenance.
The shredder requires very little maintenance. In order to maintain the efficiency of
the machine and to achieve a long service life, observe the following:
•
Keep the air openings clean and free of obstructing material.
•
Check the customer installed nuts and hex-screws (tighten if necessary).
•
Spray the spiral cutter after each use with an environmentally-friendly,
biodegradable oil to protect against corrosion.
•
Always clean the shredder after each use. Brush away dirt and plant residue
which may be caught in the spiral cutter. Wipe clean the outside of the
shredder with a cloth which has been moistened with a mild detergent
and water.
•
Store the shredder upright in a dry position.
Note:
Ozito Industries will not be responsible for any damage or injuries caused
by the repair of the shredder by an unauthorised person or by mishandling of
the tool.
Summary of Contents for OZSS2400WA
Page 12: ...11 LABELS ON YOUR TOOL ...
