5
GENERAL (cont.)
13.Check for damaged parts.
Before use carefully check the tool and
power lead for damage. Check for misalignment and seizure of
moving parts, breakage of parts, damage to guards and switches and
any other conditions that may affect its operation. Ensure that the tool
will operate properly and perform its intended function. Do not use
the tool if any parts are damaged or defective. Do not use the tool if
the switch does not turn it on and off. Have any damaged or defective
parts repaired or replaced by an electrician or a power tool repairer.
Never attempt any repairs yourself.
14.Unplug the tool.
Shut off the power and wait for the tool to come to
a complete standstill before leaving it unattended. Unplug the tool
when it is not in use, before changing any parts of the tool,
accessories or attachments and before servicing.
15.Avoid unintentional starting.
Do not carry the tool with a finger on
the on/off switch. Make sure the tool is switched off when plugging in.
16. Do not abuse the cord.
Never carry the tool by its cord or pull it to
disconnect from the socket. Keep the cord away from heat, oil and
sharp edges.
17.Connect dust extraction equipment.
If devices are provided for the
connection of dust extraction and collection facilities, ensure that
these are connected and properly used.
18.Store idle tools.
When not in use, tools should be stored in a dry,
locked up or high place, out of reach of children.
19. Maintain tools with care.
Keep tools clean and in good condition for
better and safer performance. Follow the instructions for maintenance
and changing accessories. Keep handles and switches dry, clean and
free from oil and grease.
20.Have your tool repaired by an electrician or a power tool repairer.
This power tool complies with relevant safety requirements. To avoid
danger, electrical appliances must only be repaired by qualified
technicians using original spare parts; otherwise this may result in
considerable danger to the user.
21.Users.
This appliance is not intended for use by young children or
infirmed persons without supervision. Young children should be
supervised to ensure that they do not play with this appliance.
22.Replacement of the supply cord.
If the supply cord is damaged, it
must be replaced by an electrician or a power tool repairer in order to
avoid a hazard.
