12
•
Keep the ventilation slots of the circular saw clean at all times and prevent any
foreign matter from entering.
•
If the housing of the circular saw requires cleaning do not use solvents but a
moist soft cloth only.
•
The grease in the gearbox will require replacement/replenishment after
extensive use of the circular saw. Please see a power tool repairer to provide
this service.
•
Blow dust from the saw through the rear ventilation slots with compressed air
periodically to ensure a dust free tool.
NOTE: Ozito Industries will not be responsible for any damage or injuries
caused by the repair of the circular saw by an unauthorised person or by
mishandling of the tool.
MAINTENANCE
DESCRIPTION OF SYMBOLS
V
Volts
Hz
Hertz
~
Alternating current
W
Watts
/min
Revolutions or
reciprocation per minute
Double insulated
Regulator compliance mark
n
o
No load speed
nm
Nanometers
mW
Milliwatts
Power tools that are no longer usable should not be disposed
of with household waste but in an environmentally friendly way.
Please recycle where facilities exist. Check with your local
council authority for recycling advice.
Recycling packaging reduces the need for landfill and raw
materials. Reuse of recycled material decreases pollution in the
environment. Please recycle packaging where facilities exist.
Check with your local council authority for recycling advice.
CARING FOR THE ENVIRONMENT
