Ozito OZCD144V1BK Operating Instructions Manual Download Page 4

4

Warning!

A battery operated tool with integral batteries or a separate battery

pack must be recharged only with the specific charger for the battery. A
charger that may be suitable for one type of battery may create a risk of fire
when used with another battery.

Avoid accidental starting. Make sure the switch is in the locked OFF position
before inserting the battery pack. Carrying a tool with your finger on the switch or
inserting the battery pack into a tool with the switch on invites accidents.

Disconnect the battery pack from the tool or place the switch in the locked OFF
position before making any adjustments, changing accessories, or storing the tool.
Such preventative safety measures reduce the risk of starting the  tool accidentally.

When the battery pack is not in use, keep it away from other metal objects.

Read the whole manual carefully and make sure you know how to switch the tool OFF,
in an emergency, before operating the tool. Save these instructions and other
documents supplied with this machine for future reference.

1. Keep work areas clean.

Cluttered areas and benches can cause accidents.

2. Consider work area environment.

Do not expose your tool to high humidity or

rain. Do not use your tool in damp and wet conditions. Keep the work area well lit.
Do not use your tool where there is a risk of causing fire or explosion, e.g. in the
presence of flammable liquids and gases.

3. Keep children away.

Do not allow children, visitors or animals to come near the

work area or to touch the tool or power lead.

4. Dress appropriately.

Do not wear loose clothing or jewellery, as these can be

caught in moving parts. Preferably wear non-slip footwear when working outdoors.
Wear protective hair covering to keep long hair out of the way.

Congratulations on purchasing an Ozito 14.4V Cordless Drill.
We aim to provide quality tools at an affordable price. We
hope you will enjoy using this tool for many years.

Your Ozito Cordless Drill OZCD144V1BK has been designed to
drill timber, metal, plastic and for screw driving. It is intended
for DIY use only.

INTRODUCTION

SAFETY INSTRUCTIONS

GENERAL

!!

 

 

 

 

 

 

 

 

 

 

 

 

    

Summary of Contents for OZCD144V1BK














Reviews: