8
ASSEMBLY
Warning!
Always ensure the blower is disconnected from the power supply
during assembly and/or maintenance.
Connecting the direction nozzles
Unpack the two nozzles and nozzle screw.
Connect larger end of the smaller nozzle to the smaller end of the larger nozzle.
Connect the direction nozzle to the blower housing ensuring the clip of nozzle
locks into place on the blower.
Secure the nozzle to the blower by fixing the screw through the hole in the nozzle,
into the housing (screw supplied).
Using the extension cord retaining loop
To prevent the extension cord from
disconnecting from the tool during use the
blower has been designed with a cord
retaining loop.
Connecting to an extension cord
First ensure the switch on the blower is in the ‘O’ position.
Connect the blower to an extension cord. Fit the socket end of the cord through
the cord retaining loop to prevent accidental disconnection during use.
Connect the extension plug to a power-point.
Turning the blower on
Depress the ‘I’ side of the rocker switch.
Turning the blower off
Depress the ‘O’ side of the rocker switch.
OPERATION
