manualshive.com logo in svg

Ozito OHT-0185, Instruction Manual, Page: 2 / 8

Share
Download
Ozito OHT-0185 Instruction Manual Download Page 2

3

ONLINE MANUAL

Scan this QR Code with your 

mobile device to take you to 

the online manual.

9

Blade Cover

 

 The blade cover protects 

the blade when not in use. 

Simply slide it off the blade 

before use. Once finished 

operating, place the cover 

back over the blade.

1.  Battery seating
2.  Sure grip handle
3.  On/off trigger
4.  Safety switch

5.  Front handle
6.  Safety guard
7.  Dual action cutting blades
8.  Impact guard

9. Battery release button
10. Battery charge indicators
11. Charge indicator button
12. Charger cradle

13. Charger LED indicators
14. Charger adaptor
15. Blade cover

CORDLESS HEDGE TRIMMER

ACCESSORIES

KNOW YOUR PRODUCT

1.  ASSEMBLY

SETUP & PREPARATION

CAUTION!

 ENSURE THE TOOL IS OFF & THE BATTERY 

REMOVED BEFORE PERFORMING ANY OF THE 

FOLLOWING TASKS.

1

3

4 5

7

8

6

 WARNING!

 NEVER START THE HEDGE TRIMMER 

WHILE THE BLADE COVER IS FITTED.

13

15

12

14

 WARNING!

 NEVER USE THE HEDGE TRIMMER 

UNLESS THE SAFETY GUARD IS PROPERLY 

FITTED.

 WARNING!

 WHEN HANDLING THE BLADE    

ASSEMBLY, WEAR NON-SLIP, HEAVY DUTY 

PROTECTIVE GLOVES. DO NOT PLACE YOUR 

HAND OR FINGERS BETWEEN THE BLADES OR IN 

ANY POSITION WHERE THEY COULD GET 

PINCHED OR CUT. NEVER TOUCH BLADES OR 

SERVICE THE UNIT WITH THE BATTERY PACK 

INSTALLED.

11

10

Charg

ing

Charg

ed

Charg

ing

Charg

ed

Fitting the Safety Guard

Slide the safety guard onto the 

front of the motor housing, just 

above the blade. Ensure that 

the holes in the guard align 

with the two holes in the motor 

housing. Secure in place with 

two screws provided.

Fitting the Front Handle

Slide the front handle onto 

the front of the motor housing, 

ensure that the holes in the 

handle align with the two holes 

in the motor housing. Secure in 

place with two screws provided.

2

Summary of Contents for OHT-0185









Reviews:

No comments