background image

Fitting the battery into the grass trimmer.

1.   Align the ribs of the battery with 

the recess behind the handle.

2.   Slide the battery in so that it 

clicks into place. 

Removing the battery from the 

grass trimmer

1.   Push and hold in the Battery 

Release Button.

2.   Slide the battery from its 

position.

Switching On and Off

F

or your safety this Grass Trimmer is designed with a safety 

lock off mechanism.This prevents accidental starting. If you only 

squeeze the on/off trigger the Grass Trimmer will not start. 

1.   Push the lock-off button 

in with your thumb and 

then squeeze the trigger 

with your fingers.

2.   Once the tool is running,  

you can release the lock  

off button.

3.   To turn the tool off, 

release the trigger.

3.  CONTROLS & OPERATION

OPERATION

 

WARNING!:

 THE CUTTING ELEMENTS CONTINUE 

TO ROTATE AFTER THE MOTOR IS SWITCHED OFF.

Battery Charge 

Indicator

The purchased battery is 

equipped with a battery 

indicator to show the state of 

the battery charge. Press the 

charge indicator button  and 

look to see how many LED’s 

illuminate. 

 

1  RED LED

 indicates the battery 

requires immediate charging.

1  GREEN LED

 indicates that the 

battery has only a low charge and 

requires charging soon.

2  GREEN LEDs

 indicate that the 

battery has mid state of charge.

3  GREEN LEDs

 indicate that the 

battery is fully charged.

 

 

 

Battery protection system

The tool is equipped with the battery protection system, which helps to 

ensure a long service life.
The output power automaticaly cuts off during operation when the tool 

and battery are placed under the following situations:

•  When tool is overloaded:

If this occurs, turn off the grass trimmer and remove the cause of 

overload, then turn the tool back on to restart.

•  When the remaining battery capacity becomes low:

Recharge the battery pack.

Note:  

The battery protection system does not in any way damage the 

tool.

Note:  

The indicated capacity may be lower than the actual level during 

use or immediantely after using the tool.

 

WARNING!:

 STONES, PIECES OF METAL AND 

OTHER OBJECTS CAN BE THROWN OUT AT HIGH 

SPEED BY THE BLADES.

Summary of Contents for OGT-018









Reviews: