5. SETTINGS ADJUSTMENTS
Changing Temperature Units
1. With the unit switched on and in
measuring mode, press and hold the ‘DP
| SET’ button to enter the settings menu.
2. The first settings menu adjusts the units
of measurement for the the temperature.
3. Press the ‘Backlight | HOLD’
button to toggle between °C
and °F.
4. Press the ‘DP | SET’ button to enter the
next menu.
Auto Shut Off
The next settings menu is for the auto
shut off function.
1. Press the ‘Backlight | HOLD’ button to
toggle this setting on/off.
2. Press the ‘DP | SET’ button to enter
the next menu.
Toggling Measurement Alarm Functions On & Off
The settings menu then goes through the alarm functions for
temperature, humidity and dew point respectively.
1. Press the ‘Backlight | HOLD’ button to
toggle the temperature alarm on/off.
2. Press the ‘DP | SET’ button to enter
the next menu.
3. Repeat steps 1 and 2 for the humidity
and dew point alarms.
Note:
Pressing the DP | SET’ button after the dew point alarm menu
exits settings and puts the unit back into measuring mode.
Adjusting The Humidity Offset
The humidity readings can be recalibrated when necessary by adding
an offset.
1. With the unit switched off,
press and hold down the
‘MAX | MIN’ button.
2. Then also press and hold
down the power button until
the unit emits a beep and
enters the humidity offset
menu.
Note:
The humidity reading is
calculated from the measured
humidity plus the offset value.
3. Press the rightwards arrow (‘MIN |
MAX’ button) to cycle through the
digits. The selected digit will flash.
4. Use the up and down arrows
(‘Backlight | HOLD’ and ‘DP
| SET’ buttons respectively)
to change the selected digit
value.
5. Press the power button to turn the unit off after completing the
adjustment.
DIGITAL HUMIDITY &
TEMPERATURE METER
HOLD
SET
DP
MIN
MAX
PRESS
&
HOLD
H
%
DIGITAL HUMIDITY &
TEMPERATURE METER
HOLD
SET
DP
MIN
MAX
DIGITAL HUMIDITY &
TEMPERATURE METER
HOLD
SET
DP
MIN
MAX
SET
DIGITAL HUMIDITY &
TEMPERATURE METER
HOLD
SET
DP
MIN
MAX
SET
DIGITAL HUMIDITY &
TEMPERATURE METER
HOLD
SET
DP
MIN
MAX
SET
DIGITAL HUMIDITY &
TEMPERATURE METER
HOLD
SET
DP
MIN
MAX
SET
ALM
1.
2.
DIGITAL HUMIDITY &
TEMPERATURE METER
MIN
MAX
%
HOLD
SET
DP
DIGITAL HUMIDITY &
TEMPERATURE METER
HOLD
SET
DP
MIN
MAX
%
DIGITAL HUMIDITY &
TEMPERATURE METER
HOLD
SET
DP
MIN
MAX
PRESS & HOLD
1.
2.
H
%
DIGITAL HUMIDITY &
TEMPERATURE METER
HOLD
SET
DP
MIN
MAX
%
OFFSET
VALUE
HUMIDITY
READING
