12
OPERATION (cont.)
Sanding
NOTE: Ensure you have the correct sanding paper for your application. Always
test on a scrap workpiece before using on your workpiece.
1. In sanding mode, the Multi Function Tool can be used on materials such as wood,
plastic, metal and painted surfaces.
2. Slide the on/off switch (1) forward to the “on” position. Ensure the Multi Function
Tool is not placed on the workpiece.
3. Select the desired oscillation frequency speed on the variable speed dial (5) and
wait until the motor reaches its maximum speed.
4. Place the Multi Function Tool on your workpiece,
ensuring the whole area of the sanding base is in
contact with the work surface (Fig. 9).
5. Allow the Multi Function Tool to do the work and do
not apply heavy pressure on the Multi Function Tool.
Heavy pressure does not increase the removal of
material but will wear your sanding paper faster.
6. If sanding corners in hard to reach areas use the tip
or triangle edge of the hook & loop sanding pad (8)
(Fig. 10).
NOTE: For best results, the sanding pad must be kept flat on the workpiece. Do not
tilt the sanding base and use the edge of the sanding paper or the sanding pad may
become damaged, causing the sanding paper not to adhere to the base correctly.
Fig. 9
Fig. 10
Summary of Contents for MFT-012
Page 1: ......
