MFQ-3100
4. SAWING
5. SCRAPING
Semi Circular & Straight Blade
2. Turn multi function tool on
and select speed.
1. Ensure the workpiece
is securely held down.
3. Use slight pendulum
motion when plunge
cutting.
Note:
Ensure blades are not blunt or damaged in any way
before commencing application.
1. Turn multi function
tool on and select
appropriate speed.
2. Place multi function tool on the workpiece at an angle of
approx 10-15
°
.
3. Allow the scraper to do the work; do not apply heavy pressure
to the multi function tool. This may cause the multi function
tool to overload or cut into the surface of the workpiece.
10-15°
Grout Removal Disc
1. Turn the multi function tool
on and select speed.
2. Use slight pendulum
motion when cutting.
Note:
Periodicaly turn the
unit off and remove any
built-up dust and debris.
