![background image](http://html1.mh-extra.com/html/ozito/lmp-301/lmp-301_operation-manual_1666444006.webp)
ASSEMBLY (cont.)
6
Fasten handle uprights and upper handle
together using two screws and nuts
as shown.
Now the handle is fully assembled and
ready to be attached to the mower head.
To attach the handle to the mower head,
locate the two metal lugs found forward of
the cutting bar adjustment lock nuts. Insert
one of the large holes in the handle over
the lug, then repeat the same process on
the other side. It may be necessary to
squeeze the two lower handle arms
together to allow room for locating the
second arm over the remaining metal lug.
Screw
Upright
Nut
Upper handle
Metal lug
Lower
handle
Summary of Contents for LMP-301
Page 1: ......