3
2
1
3
2
1
4. CONTROLS
The lock-on switch allows the jigsaw to continue operating without
having to hold the on/off switch down.
The cutting speed should be adjusted to match the material of the
workpiece. In general, use faster speeds for softer materials.
The jigsaw has a pendulum action feature which enables the blade to
cut faster and more efficiently in thick and softer materials. See below
for a guide on choosing the correct setting.
1 To use the pendulum action,
rotate the pendulum action
selector anti-clockwise to a
higher setting.
2 To use standard cutting action,
rotate the pendulum action
selector clockwise to a lower
setting.
3
2
1
3
2
1
5. CONTROLS CONTINUED
OPERATION
Adjusting the Cutting Speed
Adjusting the Cutting Action
0 -
No pendulum action for fine clean cuts
on thin or hard materials
1 -
Small pendulum action for faster
cutting on hard materials
2 -
Medium pendulum action for faster
cutting on softer materials
3 -
Large pendulum action for fast cutting
along the grain on soft materials.
CAUTION!
TO REDUCE THE RISK OF ELECTRICAL
SHOCK, THE USE OF A RESIDUAL CURRENT DEVICE
(RATED 30mA OR LESS) IS RECOMMENDED.
3 To stop the tool, squeeze
and release the on/off
trigger.
1 Hold in the on/off trigger,
then press the lock on
button.
Lock-On Button
2 You can now release the on/
off trigger & lock on button.
3
2
1
a
b
3
2
1
3
2
1
1 To start cutting, squeeze the
on/off trigger.
2 To stop cutting, release the
on/off trigger.
On/Off Trigger
1 For faster speeds, rotate the
variable speed dial to a higher
number.
For slower speeds, rotate the dial
to a lower number.
