Power tools that are no longer usable should not be disposed of
with household waste but in an environmentally friendly way. Please
recycle where facilities exist. Check with your local council authority
for recycling advice.
Recycling packaging reduces the need for landfill and raw materials.
Reuse of recycled material decreases pollution in the environment.
Please recycle packaging where facilities exist. Check with your
local council authority for recycling advice.
MAINTENANCE
DESCRIPTION OF SYMBOLS
CARING FOR THE ENVIRONMENT
1. After each use, blow air through the tool housing to ensure it is free from all
dust particles that may build up. Build up of dust particles may cause the tool to
overheat and fail.
2. If the enclosure of the tool requires cleaning do not use solvents but a moist
soft cloth only. Never let any liquid get inside the tool; never immerse any part
of the tool into a liquid.
Carbon Brushes
When the carbon brushes wear out, the jigsaw
will spark and/or stop. Discontinue use as soon
as this happens. They should be replaced prior to
recommencing use of the jigsaw. Carbon brushes
are a wearing component of the jigsaw therefore
not covered under warranty. Continuing to use the
jigsaw when carbon brushes need to be replaced
may cause permanent damage to the jigsaw. Carbon
brushes will wear out after many uses but when the carbon brushes need to be
replaced, take the jigsaw to an electrician or a power tool repairer for a quick
and low cost replacement. Always replace both carbon brushes at the same
time.
Note: Ozito Industries will not be responsible for any damage or injuries
caused by the repair of the jigsaw by an unauthorised person or by mishandling
of the jigsaw.
Spare parts can be ordered from the Special Orders Desk
at your local Bunnings Warehouse.
For further information, or any parts not listed here, visit
www.ozito.com.au or contact Ozito Customer Service:
Australia 1800 069 486
New Zealand 0508 069 486
E-mail: [email protected]
SPARE PARTS
V
Volts
Hz
Hertz
~
Alternating current
W
Watts
/min
Revolutions per minute
Double insulated
Regulator compliance mark
Warning
n
o
No load speed
Read instruction manual
