4. DUST EXTRACTION
The lock on switch allows the jigsaw to continue operating without
having to hold the on/off switch down.
The dust blower function uses air to keep the cutting line free of dust
and chips.
A dust extractor can be fitted to the jigsaw dust extractor adaptor to
remove dust and chips while cutting. The adaptor can also be removed
if it gets in the way.
1 To use the dust blowing function push the dust blower switch
forward. To turn off, push switch backwards.
on
off
5. CONTROLS
OPERATION
Dust Extraction Adaptor
Dust blower
CAUtION!
tO REDUCE thE RISk Of ELECtRICAL
ShOCk, thE USE Of A RESIDUAL CURRENt DEvICE
(RAtED 30mA OR LESS) IS RECOMMENDED.
1 Fit the dust extraction adaptor to the jigsaw by pushing its slot
from the back.
2 To remove, raise the back of the adaptor and pull away from the
tool.
3 To unlock, squeeze and
release the on/off trigger.
1 Hold in the on/off trigger,
then press the lock on
button.
Lock On button
2 Release the on/off trigger &
then the lock on button.
a
b
a
b
1 To start cutting, squeeze the
on/off trigger.
2 To stop cutting, release the
on/off trigger.
On/Off trigger
