background image

4

The Ozito HTR-550 Hedge Trimmer is designed for trimming and
shaping shrubs and hedges.

The rotating rear handle allows the user greater control to achieve
accuracy and perfectly manicured gardens.

Dual action cutting blades enhance cutting efficiency by giving a
quicker, cleaner cut. 

Safety is of great importance, with this in mind, the hedge trimmer is
fitted with a dual handed safety switch which prevents accidental
starting, and a blade brake that stops the blades within 0.5 seconds
once the switch is released.

This product is intended for DIY use only.

Warning!

When using mains-powered equipment, basic safety precautions,

including the following, should always be followed to reduce risk of fire, electric
shock, personal injury and material damage.

Read and understand the manual prior to operating this tool.

Save these instructions and other documents supplied with this tool for future reference.

The electric motor has been designed for 230V and 240V only. Always check that the
power supply corresponds to the voltage on the rating plate.

Note:

The supply of 230V and 240V on Ozito tools are interchangeable for Australia

and New Zealand.

This tool is double insulated in accordance with AS/NZS 60745; therefore no
earth wire is required.

If the supply cord is damaged, it must be replaced by an electrician or a power tool
repairer in order to avoid a hazard.

Note:

Double insulation does not take the place of normal safety precautions when

operating this tool. The insulation system is for added protection against injury
resulting from a possible electrical insulation failure within the tool.

Using an Extension Lead

Always use an approved extension lead suitable for the power input of this tool. Before
use, inspect the extension lead for signs of damage, wear and ageing. Replace the
extension lead if damaged or defective. When using an extension lead on a reel, always
unwind the lead completely. Use of an extension lead not suitable for the power input of
the tool or which is damaged or defective may result in a risk of fire and electric shock.

INTRODUCTION

SAFETY INSTRUCTIONS

ELECTRICAL SAFETY

HTR-550 Manual.qxd  8/31/09  2:09 PM  Page 5

Summary of Contents for HTR-550















Reviews: