1. To rotate the rear handle
push the rotating handle
lock and rotate the rear
handle left or right to the
desired position.
5. USING THE HEDGE TRIMMER
4. CONTROLS
OPERATION
1. Using one hand depress
and hold the safety switch
on the front handle.
For user safety the safety switch and on/off switch must be
operated simultaneously.
2. To turn on squeeze the on/
off switch.
2. Maintain proper footing and balance. Do not overreach.
3. Once either the safety switch or on/off switch is released the
hedge trimmer will stop.
3. Squeeze both the
safety switch and the
on/off switch to start
the trimmer.
1. Ensure the extension cord is behind the trimmer and away
from operation.
5. A slight downward tilt will achieve the best results.
4. Use wide sweeping motions, feeding the blade teeth
through the twigs.
On/Off Switch
Using the Hedge Trimmer
CAUTION:
TO REDUCE THE RISK OF ELECTRICAL SHOCK,
WE RECOMMEND THE USE OF A RESIDUAL CURRENT
DEVICE (RATED 30MA OR LESS).
WARNING:
ALWAYS USE THE HEDGE TRIMMER WITH
BOTH HANDS.
This hedge trimmer is fitted with a rotating rear handle. It can
be rotated counter clockwise 45° and 90° and clockwise 45°
and 90°
Rotating the rear handle
Note:
The Hedge Trimmer is fitted with a motor brake which
will stop the cutting blade within 0.5 seconds as soon as either
switch is released. There may be a small flash visible in the area
of the lower motor ventilation slots. This is normal and will not
damage the machine.
Note:
The handle has 5 positions, 45° and 90º to the left, 0°
in the centre and 45° and 90º to the right. The rotating handle
button will lock at any of these positions
