background image

1

GGM-010U

1.  LOADING A GLUE STICK

2.  OPERATION

WARRANTY

OZITO UK

 Unit 9 Stadium Court, Wirral International Business Park, 

Plantation Road, Bromborough, Wirral, CH62 3QG

ONLINE MANUAL

Scan this QR Code with your 

mobile device to take you to 

the online manual.

Installing the Glue Stick

2   Squeeze the flow control 

trigger multiple times to allow 

the glue stick to be pushed 

down.

1   Insert the glue 

stick into the glue 

stick entry and 

slide down gently.

WARNING!

 

ENSURE THE TOOL IS SWITCHED OFF AND 

ALLOWED TO COOL DOWN BEFORE PERFORMING ANY 

OF THE FOLLOWING TASKS.

3   Press the surfaces 

to be glued 

together within 

15 seconds for a 

strong bond.

2   Squeeze the trigger flow 

control to release the glue.

4   To stop the flow of glue from 

the gun, release the flow 

control trigger.

Tip: 

Ensure the glue sticks are 

heated fully to allow an even flow 

of glue.

1   Plug the power cord into a 

power point and switch on.

WARNING!

 

DO NOT ALLOW HOT GLUE TO COME IN 

CONTACT WITH PRODUCT HOUSING DURING USE.

DESCRIPTION OF SYMBOLS

All of our products undergo strict quality checks to ensure that they reach you in 

perfect condition. In the unlikely event that your device develops a fault, please 

contact our service department at the address shown on this guarantee card. 

You can also contact us by telephone using the customer service number shown. 

Please note the following terms under which guarantee claims can be made:
1. These warranty terms regulate additional warranty services, which the 

manufacturer mentioned below promises to buyers of its new products in addition 

to their statutory guarantee claims are not affected by this guarantee. Our 

guarantee is free of charge to you.
2. The warranty services only covers defects due to material or manufacturing 

faults on a product which you have bought from the manufacturer mentioned 

below are limited to either the rectification of said defects on the product or the 

replacement of the product, whichever we prefer. 

Please note that our devices are not designed for use in commercial, trade or 

professional applications. A guarantee contract will not be created if the device 

has been used by commercial, trade or industrial business or has been exposed 

to similar stresses during the guarantee period.
3. The following are not covered by our guarantee: 

- Damage to the device caused by a failure to follow the assembly instructions 

or due to incorrect installation, a failure to follow the operating instructions (for 

example connecting it to an incorrect mains voltage or current type) or a failure 

to follow the maintenance and safety instructions or by exposing the device to 

abnormal environmental conditions or by lack of care and maintenance. 

- Damage to the device caused by abuse or incorrect use (for example 

overloading the device or the use or unapproved tools or accessories), ingress of 

foreign bodies into the device (such as sand, stones or dust, transport damage), 

the use of force or damage caused by external forces (for example by dropping 

it). 

- Damage to the device or parts of the device caused by normal or natural wear or 

tear or by normal use of the device.
4. Your Product is guaranteed for a period of 36 months from the original 

date of purchase and is intended for DIY (Do It Yourself) use only. Lithium Ion 

batteries and chargers are covered by a 12 month warranty. Warranty excludes 

consumable parts. Guarantee claims should be submitted before the end of the 

guarantee period within two weeks of the defect being noticed. No guarantee 

claims will be accepted after the end of the guarantee period. The original 

guarantee period remains applicable to the device even if repairs are carried out 

or parts are replaced. In such cases, the work performed or parts fitted will not 

result in an extension of the guarantee period, and no new guarantee will become 

active for the work performed or parts fitted. This also applies if an on-site service 

is used. 

IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY YOU MUST RETURN 

THE PRODUCT TO THE PLACE OF PURCHASE WITH YOUR REGISTER 

RECEIPT.
Please refer to the restrictions of this warranty concerning wearing parts, 

consumables and missing parts as set out in the service information in these 

operating instructions. 
CUSTOMER SERVICE HELPLINE 

GB: 0151 294 4488 

IRL: 1850 882711 

Ozito-diy.co.uk

  V

 

      

Volts

 

 

 

              

Hz

 

    

Hertz

  

~

 

    

 Alternating current

 

 

W

 

    

Watts     

     

 

°C 

      

   Degrees Celsius

   

 

Read instruction manual   

 

    Double insulated  

Summary of Contents for GGM-010U

Page 1: ...ring power tools Such preventive safety measures reduce the risk of starting the power tool accidentally d Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool Power tools are dangerous in the hands of untrained users e Maintain power tools Check for misalignment or binding of moving parts breaka...

Page 2: ...ed if the device has been used by commercial trade or industrial business or has been exposed to similar stresses during the guarantee period 3 The following are not covered by our guarantee Damage to the device caused by a failure to follow the assembly instructions or due to incorrect installation a failure to follow the operating instructions for example connecting it to an incorrect mains volt...

Page 3: ...sc gmbh info Plea se ensure that you provide a precise description of the problem and answer the following questions in all cases Did the equipment work at all or was it defective from the beginning Did you notice anything symptom or defect prior to the failure What malfunction does the equipment have in your opinion main symptom Describe this malfunction Yang Product Management Weichselgartner Ge...

Page 4: ...ator and not the manufacturer will be liable for any damage or inju ries of any kind caused as a result of this Please note that our equipment has not been de signed for use in commercial trade or industrial applications Our warranty will be voided if the machine is used in commercial trade or industrial businesses or for equivalent purposes Technical data Mains connection 230 240 V 50 Hz Power ra...

Reviews: