4. ENGRAVING
5. Use a light pressure while
guiding the point over the
work piece.
1. Connect the engraver to mains power and ensure the work piece
is properly secured.
3. Firmly hold the engraver like you would hold a pen.
2. Set stroke adjustment dial to
desired setting.
4. Turn the engraver on.
Note:
It is recommended that you practice on a scrap piece of
material before you start.
2. Set stroke adjustment dial to
desired setting.
WARNING! Always wear safety glasses when using this tool.
5. ENGRAVING CONT.
EGR-2050
