DESCRIPTION OF SYMBOLS
Spare parts can be ordered from the Special Orders Desk at
your local Bunnings Warehouse or Homebase store.
For further information, or any parts visit
www.ozito-diy.co.uk or contact Ozito Customer Service:
Great Britain: 0151 294 4488
Ireland: 1850 882711
E-mail: [email protected]
SPARE PARTS
Read the operating instructions.
Wear safety goggles.
Safety class II
Never expose the
device to rain
Wear ear protection
If the cable is damaged or cut, disconnect the power plug from
the mains immediately.
Maximum cutting length / chain speed vu: 13.5 m/s
Danger!
Sound and vibration
Sound and vibration values were measured in accordance with EN 60745.
LPA sound pressure level ...........................85dB(A)
KPA uncertainty ............................................3dB
LWA sound power level ..............................105dB(A)
KWA uncertainty ............................................2.55dB
Wear ear-muffs
The impact of noise can cause damage to hearing. Total vibration values (vector sum of
three directions) determined in accordance with EN 60745.
Handle under load
Vibration emission value ah = 5.781 m/s²
K uncertainty = 1.5 m/s
²
The specified vibration value was established in accordance with a standardized testing
method. It may change according to how the electric equipment is used and may exceed
the specified value in exceptional circumstances
.
The specified vibration value can be used to compare the equipment with other electric
power tools.
The specified vibration value can be used for initial assessment of a harmful effect.
Keep the noise emissions and vibrations to a minimum.
• Only use appliances which are in perfect working order.
• Service and clean the appliance regularly.
• Adapt your working style to suit the appliance.
• Do not overload the appliance.
• Have the appliance serviced whenever necessary.
• Switch the appliance off when it is not in use.
• Wear protective gloves.
ADDITIONAL INFORMATION
For EU countries only
Never place any electric power tools in your household refuse.
To comply with European Directive 2012/19/EC concerning old electric and
electronic equipment and its implementation in national laws, old electric
power tools have to be separated from other waste and disposed of in an
environment-friendly fashion, e.g. by taking to a recycling depot.
Recycling alternative to the return request:
As an alternative to returning the equipment to the manufacturer, the owner of
the electrical equipment must make sure that the equipment is properly dis-
posed of if he no longer wants to keep the equipment. The old equipment can
be returned to a suitable collection point that will dispose of the equipment in
accordance with the national recycling and waste disposal regulations. This
does not apply to any accessories or aids without electrical components sup-
plied with the old equipment.
•
The product meets the requirements of EN 61000-3-11 and is subject to
special connection conditions. This means that use of the product at any
freely selectable connection point is not allowed.
•
Given unfavourable conditions in the power supply the product can cause
the voltage to fluctuate temporarily.
•
The product is intended solely for use at connection points that
a) do not exceed a maximum permitted mains system impedance of
Z sys = 0.3 Ω, or
b) have a continuous current-carrying capacity of the mains of at least
100 A per phase.
•
As the user, you are required to ensure, in consultation with your electric
power company if necessary, that the connection point at which you wish
to operate the product meets one of the two requirements, a) or b), named
above.
Read the operating instructions.
Wear safety goggles.
Safety class II
Never expose the
device to rain
Wear ear protection
If the cable is damaged or cut, disconnect the power plug from
the mains immediately.
Maximum cutting length / chain speed vu: 13.5 m/s
We have competent service partners in all countries named on the guarantee
certificate whose contact details can also be found on the guarantee certificate.
These partners will help you with all service requests such as repairs, spare and
wearing part orders or the purchase of consumables.
Please note that the following parts of this product are subject to normal or
natural wear and that the following parts are therefore also required for use as
consumables.
* Not necessarily included in the scope of delivery!
In the effect of defects or faults, please register the problem on the internet at
www.isc-gmbh.info. Please ensure that you provide a precise description of the
problem and answer the following questions in all cases:
•
Did the equipment work at all or was it defective from the beginning?
•
Did you notice anything (symptom or defect) prior to the failure?
•
What malfunction does the equipment have in your opinion (main symptom)?
Describe this malfunction.
Category
Example
Wear parts*
Cutter bar, carbon brushes
Consumables
Saw chain
Missing parts
SERVICE INFORMATION
