2. FITTING & REMOVING THE PADDLE
3. ON/OFF SWITCH
OPERATION
On/Off Trigger
Lock-On Button
2 To stop the mixer, release the
on/off trigger.
1 To start the mixer, squeeze the
on/off trigger.
2 To unlock the mixer, squeeze
the on/off trigger and then
release.
2 Screw the mixing paddle
clockwise into the collet nut.
Note:
Ensure the mixing paddle is tightly secured in place before
operating.
1 To lock the mixer on,
squeeze the on/off
trigger then depress
the lock-on button.
1 Align the mixing
paddle with the collet
at the front of the
mixer.
3 Using the supplied
spanners, hold the
collet nut in place
whilst tightening
the nut on the
mixing paddle in a
clockwise direction.
4 To remove the
mixing paddle,
loosen the nut on the
mixing paddle using
both of the supplied
spanners.
The tool has a variable speed trigger, the further you depress the on/off
trigger the higher the speed of the mixer.
CAUTION!
TO REDUCE THE RISK OF ELECTRICAL
SHOCK, THE USE OF A RESIDUAL CURRENT DEVICE
(RATED 30mA OR LESS) IS RECOMMENDED.
WARNING!
ENSURE THE LOCK-ON BUTTON HAS BEEN
RELEASED BEFORE DISCONNECTING THE TOOL FROM
THE POWER SUPPLY. FAILURE TO DO SO WILL CAUSE
THE TOOL TO START IMMEDIATELY THE NEXT TIME IT
IS PLUGGED IN RESULTING IN POSSIBLE BODILY HARM
OR PROPERTY DAMAGE.
