ONLINE MANUAL
Scan this QR Code with your
mobile device to take you to
the online manual.
1 Collet Nut
2 6.35mm Collet
3 Soft Grip Sleeve
4 Metal Gear Box
5 On/off Switch
6 Rear Handle
STRAIGHT GRINDER
KNOW YOUR PRODUCT
1. FITTING ACCESSORIES
1. Fit spindle lock
spanner onto the
flats on the spindle
to lock the spindle.
4. Insert at least 25% of the accessory shaft into the collet.
3. Loosen the collet nut with
the collet nut spanner.
2. Fit the collet nut spanner on
to the collet nut.
7 Spindle Lock Spanner
8 Collet Nut Spanner
ACCESSORIES
SETUP & PREPARATION
Caution: Ensure the tool is disconnected from the power supply
before performing any of the following operations.
NOTE:
ONLY USE ACCESSORIES WITH A 6.35MM
(1/4”) SHAFT AND A RATED RECOMMENDED
SPEED OF NO LESS THAN 29,000/MIN
25%
Note: Do not remove the collet nut completely. Only loosen it enough
to enable the accessory to be inserted and removed from the collet.
