ONLINE MANUAL
Scan this QR Code with your
mobile device to take you to
the online manual.
KNOW YOUR PRODUCT
SETUP & PREPARATION
1. DEPTH & BEVEL ADJUSTMENT
Depth Adjustment
Depth should be adjusted so that no more than one tooth is
protruding through the timber. This helps to minimise splintering.
1 Baseplate
2 Dust Extraction Port
3 Lower Blade Guard Lever
4 Blade
5 Lower Blade Guard
6 Blade Flange
7 Upper Blade Guard
8 Front Handle
9 Rip Fence
10 Cutting Guide Notch
CIRCULAR SAW
11 Rip Fence Lock Knob
12 Bevel Adjustment Knob
13 Bevel Scale
14 Spindle Lock Button
15 On/Off Switch
16 Lock Off Button
17 Depth Adjustment Scale
18 Depth Adjustment Knob
19 Allen Key
185MM X 16MM X 2.4MM X 24T
Bevel Adjustment
4. Loosen bevel
adjustment knob. Align
baseplate to desired
angle on bevel scale.
5. Tighten bevel adjustment
knob.
1. Loosen the depth
adjustment knob.
2. Hold the baseplate down
with one hand. Raise
or lower the saw to the
desired depth, referring to
the scale.
3. Tighten depth adjustment
knob.
Ensure the tool is disconnected from the power supply before
performing any of the following operations.
