3
ONLINE MANUAL
Scan this QR Code with your
mobile device to take you to
the online manual.
Fitting a chain and bar
1. Completely unscrew the
guide bar locking knob.
2. Remove the side cover
3. Fit the chain over the guide bar,
making sure that the cutters are
facing in the direction of rotation.
4. Place the guide bar and chain in
position, ensuring that the chain
is around sprocket wheel (A). Also
ensure that the pin (B) fits into the
hole in the guide bar.
Note:
If positioning the chain around the
sprocket wheel is proving difficult, turn
the chain tensioning adjustment knob
anti-clockwise to loosen the tension.
1 Rear Handle
2 Trigger Switch
3 Battery
4
Chain Tensioning
Adjustment Knob
5 Side Cover
6 Hand Guard / Chain Brake
7 Guide Bar Locking Knob
8 Guide Bar
9 Chain
10 Bucking Spikes
11 Oil Level Window
12 Chain Oil Tank Cap
13 Front Handle
14 Battery Release Button
15 Lock-off Button
16 Chain Bar Cover
17 Charge Indicator Button /
Status LEDs
18 Battery Charger LED
19 Battery Charger
CORDLESS CHAINSAW
ACCESSORIES
KNOW YOUR PRODUCT
1. ASSEMBLY
SETUP & PREPARATION
12
16
19
17
18
2
13
10
14 15
4
11
CAUTION!:
ALWAYS BE SURE THAT THE TOOL IS
SWITCHED OFF AND THE BATTERY PACK IS REMOVED
BEFORE CARRYING OUT ANY WORK ON THE TOOL.
CAUTION!:
ALWAYS WEAR GLOVES WHEN HANDLING
THE CHAIN AS IT IS VERY SHARP AND CAN CUT YOU
WHEN IT IS NOT MOVING.
1
3
5
6
8
7
9
A
B
