9
OPERATION
BEFORE ASSEMBLING OR DISASSEMBLING THE CHAIN (6) BE SURE TO
DISCONNECT THE CHAINSAW FROM THE POWER SUPPLY.
ALWAYS WEAR GLOVES WHEN HANDLING THE CHAIN (6), THE CHAIN (6)
IS VERY SHARP AND CAN CUT YOU WHEN IT IS NOT MOVING.
Fitting the Guide Bar and Chain
Always wear protective gloves when working on your
chainsaw. It is important to put the chain (6) on the
correct way with the cutters facing in the direction of
rotation (Fig. 1 & 6).
Remove the bar securing nut cover (13) using the flat
end of the spanner/chain tension adjustor (14) (Fig. 2).
Using the spanner (14), remove the bar securing nut
(8) (Fig. 3) followed by the side panel (9). Fit the chain
(6) over the guide bar (7) making sure that the cutters
are facing in the direction of rotation.
Place the guide bar (7) and chain (6) onto the
chainsaw, ensuring the chain (6) is around the sprocket
wheel (B) (Fig. 4).
Fig. 1
Fig. 4
Cutters
Depth gauge
Drive links
Fig. 2
Fig. 3
