background image

3

ONLINE MANUAL

Scan this QR Code with your 

mobile device to take you to 

the online manual.

1  Charging LED
2  Sure Grip Handle
3  On/Off Switch
4  Lock Off Lever

5  Removable Base
6 Blade
7  Blade Cover

8  Hedge Trimming Blade
9  Grass Shear Blade

10 Charging Adaptor 
11 Charging Jack

CORDLESS TRIMMER/SHEAR

ACCESSORIES

KNOW YOUR PRODUCT

1.  CHANGING BLADES

SETUP & PREPARATION

WARNING:

 

ENSURE THE TOOL IS SWITCHED OFF 

BEFORE PERFORMING ANY OF THE FOLLOWING 

STEPS. WEAR GLOVES, BLADES ARE SHARP.

Removing the Base

Inserting the Base

Changing the Blade

1   Lift the tab on the 

base while pulling the 

base plate back until it 

unclips.

1   Push the base into the housing 

making sure the 4 clips align 

with there slots.

1   Lift the front of the blade from 

the housing and then slide 

forward to remove.

2   Remove the base by 

lifting from both sides.

2   Once the base is flat 

against the housing, 

push the base forward 

to secure in place.

2   To insert the desired 

blade, slide the back 

of the blade into the 

housing recess at an 

angle and then lower 

the front.

1

2

1 2 3 4

5 6 7

8 9 10 11

Summary of Contents for CGS-0036








Reviews: