!!
7
ADDITIONAL SAFETY RULES FOR CHARGER AND BATTERY
The battery pack is not fully charged out of the carton. First read the safety instructions
and then follow the charging notes and procedures.
•
The longest life and best performance can be obtained if the battery pack is
charged when the air temperature is between 18 - 24ºC. Do not charge the battery
pack in an air temperature below 10ºC or above 40ºC. This is important and will
prevent damage to the battery pack.
•
Do not incinerate the battery pack even if it is seriously damaged or is completely
worn out. The battery can explode in a fire.
•
Never attempt to open the battery pack for any reason. If the plastic housing of the
battery pack breaks or cracks, immediately discontinue use and do not recharge.
Always switch off the drill before insertion or removal of the battery pack.
To Install the Battery Pack
•
Place battery pack on a hard surface like a bench/table. Align slots on the base of
the drill handle with the battery. Slide the drill onto the battery, ensuring the
battery release button locks into place.
•
Do not use excessive force when inserting the battery pack. If the battery pack
does not slide in easily, it is not being inserted correctly. It is also possible that
there could be damage to the battery, battery terminals or drill.
To Remove the Battery Pack
•
Depress both the release buttons on the battery and slide the drill off the battery.
This tool has been shipped in a low charge condition. You should charge it prior to use.
•
Plug the charger into a 240V power outlet. Connect the charger jack to the charger
cradle socket.
•
With the battery sitting flat on a bench/table, slide the charging cradle into the
recess of the battery terminals ensuring a firm connection. Upon proper contact,
the red light will illuminate.
•
The batteries will take 3-5 hours to charge. This may vary up to 9 hours due to the
level of charge left in the batteries and also the ambient temperature.
CAUTION:
Charger does not automatically turn off when the battery is fully
charged. Please take care not to leave the tool on the charger for excessive
periods of time. Switch off the charger at mains when charging is complete.
INSTALLING OR REMOVING THE BATTERY PACK
CHARGING YOUR BATTERIES
Summary of Contents for CDR-012
Page 1: ......
