9
•
Plug the charger in an appropriate AC power outlet and switch on at
the mains.
•
Insert the battery into the charger ensuring the battery is fully seated.
The battery fits one way only.
•
To begin the charge, press the set button on the charger. The red light
will engage while the green light turns off, indicating that the battery is
being charged.
•
Once battery has been charged the green light will engage again while
the red light turns off.
•
The battery will take 1 hour to charge, this may vary up to 1
1
/
2
hours due
to the level of charge left in the batteries and also the ambient temperature.
NOTE:
If the battery is fully charged when you press the set button the red
light will not engage (the charger will not charge a fully charged battery).
After the green light has engaged the charger will cease charging. As an
added precaution, removing the battery from the charger and switching off
at the mains is recommend.
NOTE:
If light on the charger fails to come on.
•
Check the charger is securely plugged into the wall outlet and is switched on.
•
Check battery is firmly seated into the charger.
Important Charging Notes
•
The charger and battery pack may become warm to touch while charging.
This is a normal condition, and does not indicate a problem.
•
Use the charger at normal room temperatures whenever possible. To
prevent overheating, do not cover the charger and do not charge the
battery pack in direct sunlight or near heat sources.
•
If the battery pack does not charge properly:-
1. Check current at receptacle by plugging in a lamp or other appliance.
2. Check to see if receptacle is connected to a light switch which turns
power off when you turn out the light.
3. If charging problems persist, take or send the tool, battery pack and
charger to an authorised Ozito Service Agent.
CHARGING YOUR BATTERIES