3
ONLINE MANUAL
Scan this QR Code with your
mobile device to take you to
the online manual.
Connecting the blow tube and direction nozzle
1. Unpack the blow tube and
direction nozzle.
2. Connect larger end of the direction
nozzle to the smaller end of the
blow tube.
3. Ensure that all 3 buttons on the blow tube
sit within the holes in the direction nozzle.
4. Connect the blow tube to the
blower housing, ensuring that the
blower housing tabs click into the
holes in the blow tube.
5. Secure the blower tube to the
blower housing with the two 12mm
screws.
1. Direction nozzle
2. Blow tube
3. Handle
4. Trigger switch
5. Cord retaining hook
6. Air intake vent
7. Assembly screws 2 x 12mm
ELECTRIC BLOWER
KNOW YOUR PRODUCT
1. ASSEMBLY
SETUP & PREPARATION
1
2
7
3 4
6
5
WARNING!
ALWAYS ENSURE THE BLOWER IS
DISCONNECTED FROM THE POWER SUPPLY
DURING ASSEMBLY AND/OR MAINTENANCE.
