DESCRIPTION OF SYMBOLS
SPARE PARTS
AIR SAND
BLASTING GUN
500ml
INSTRUCTION MANUAL
SPECIFICATIONS
ASBG-PRO
Container Capacity:
500ml
Max. Air Pressure:
90psi (6Bar)
Average Air Consumption: 170 l/min (6cfm)
Nozzle:
ø5.5mm
Sand Thickness:
0.2-0.6mm
Weight:
0.4kg
Spare parts can be ordered from the Special Orders
Desk at your local Bunnings Warehouse.
For further information, or any parts not listed here, visit
www.ozito.com.au or contact Ozito Customer Service:
Australia 1800 069 486
New Zealand 0508 069 486
Email: [email protected]
WARNING!
Using an Extension Hose
Always use an approved extension hose suitable for the air input of this tool. Before use,
inspect the hose for signs of damage, wear and ageing. Replace the extension hose if
damaged or defective.
When using an hose on a reel, always unwind the lead completely.
It is recommended that the hose is a maximum of 25m in length.
NEVER under any circumstances aim the nozzle at another person or animal.
• In the event of an injury occurring, seek medical advice immediately.
• The sand blasting gun must not be used for spraying flammable paints and solvents with a
flash point of less than 21ºC.
GENERAL AIR TOOL SAFETY WARNINGS
AIR SAND BLASTING GUN SAFETY WARNINGS
WARNING!
Read all safety warnings and all instructions. Failure to follow the
warnings and instructions may result in electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference. The term “power tool” in the warnings
refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool.
1. Work area safety
a.
Keep work area clean and well lit.
Cluttered or dark areas invite accidents.
b.
Do not operate power tools in explosive atmospheres, such as in the presence of
flammable liquids, gases or dust.
Power tools create sparks which may ignite the dust
or fumes.
c.
Keep children and bystanders away while operating a power tool.
Distractions can
cause you to lose control.
d.
Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing
and gloves away from moving parts.
Loose clothes, jewellery or long hair can be
caught in moving parts.
e. Check the maximum pressure rating of any tools or accessories that you intend using with
the compressor. The output pressure of the air from the compressor must be regulated so
that it never exceeds the rated pressure of the tool or accessory.
f. Always wear safety goggles or glasses when using the air compressor. Never point the
nozzle of an accessory towards any part of your body or towards another person.
g.
Drain the moisture from the tank daily.
It will help prevent corrosion.
h. Use safety equipment including safety goggles or shield, ear protection, breathing respirator
mask and protective clothing.
i. Air tools should not be used in a potentially explosive environment.
j. Use safety equipment including safety goggles or shield, ear protection, breathing or
respirator mask and protective clothing.
k.
The tool must be used only for its prescribed purpose.
Any use other than those mentioned
in this Manual will be considered a case of misuse. The user and not the manufacturer
shall be liable for any damage or injury resulting from such cases of misuse.
WARNING!
In the event that an air line is cut or broken, the air supply must be turned off
at the compressor. A broken air line which is not supported is extremely dangerous and
can whip around very quickly, both with the capability of striking people, and blowing foreign
particles into the air.
Do not attempt to catch the air line but immediately keep bystanders well clear and turn off the air
supply to the hose, turn off the compressor at the On / Off button, and then remove the hose from
the compressor.
This appliance is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge, unless they
have been given the supervision or instruction concerning use of the appliance by a person
responsible for their safety.
Children should be supervised to ensure that they do not play with the appliance.
Warning
Read instruction
manual
Wear eye protection
and breathing mask
Cubic feet per minute
Wear ear protection
Millilitres per minute
ml/min
cfm
• Always ensure there is adequate ventilation when spraying.
• The use of ear protection is recommended.
• Eye protection is recommended to keep hazardous vapours and liquids out of eyes.
• Always wear a face mask when spraying.
• Always keep the spray nozzle in place during use. Never allow the spray to come in direct
contact with the skin.
• Never immerse the spray gun in liquid.
NEVER allow children to operate or play with the sand blasting gun.
• Before cleaning, always disconnect the appliance from the air supply.
• Always disconnect from air supply when refilling the media container.
• After every use ensure you clean your sand blasting gun thoroughly.
NEVER use the sand blasting gun outside when it is raining.
1 Sand Blasting Media (2 x 1kg)
2 Nozzle
3 On/Off Trigger
4 Media Container
5 Container Lid
6 Air Inlet
KNOW YOUR PRODUCT
