DESCRIPTION OF SYMBOLS
CARING FOR THE ENVIRONMENT
Power tools that are no longer usable should not be disposed of
with household waste but in an environmentally friendly way. Please
recycle where facilities exist. Check with your local council authority
for recycling advice.
Recycling packaging reduces the need for landfill and raw materials.
Reuse of recycled material decreases pollution in the environment.
Please recycle packaging where facilities exist. Check with your
local council authority for recycling advice.
TROUBLESHOOTING
Cleaning
• Keep the ventilation vents of the Compressor clean at all times, if
possible, prevent foreign matter from entering the vents.
• After each use, blow air through the Compressor housing to ensure
it is free from all dust particles which may build up. Build up of dust
particles may cause the Compressor to overheat and fail.
• If the enclosure of the Compressor requires cleaning do not use
solvents but a moist soft cloth only. Never let any liquid get inside the
Compressor; never immerse any part of the Compressor into a liquid.
Note:
Ozito Industries will not be responsible for any damage or
injuries caused by the repair of the Compressor by an unauthorised
person or by mishandling of the Compressor.
Problem
Cause
Solution
The compressor
does not start
Compressor not
connected to the power
Connect the 12V
socket to a 12V DC
outlet
Insufficient supply
voltage
Try another 12V
outlet
Fuse needs replacing
Replace Fuse
The compressor
starts but there is no
pressure
Loose hose
connections
Check the
compressed air
hose and adaptor
and replace if
necessary
The seals are damaged Check the seals
and have any
damaged seals
replaced by a
service centre
MAINTENANCE
WARNING!
BEFORE CLEANING YOUR COMPRESSOR
OR CARRYING OUT ANY MAINTENANCE
PROCEDURE, ENSURE THE COMPRESSOR IS
SWITCHED OFF AND DISCONNECTED FROM THE
POWER SUPPLY.
WARNING!
STORE THE COMPRESSOR ONLY IN A
DRY LOCATION WHICH IS NOT ACCESSIBLE TO
UNAUTHORISED PERSONS.
WARNING!
WAIT UNTIL THE COMPRESSOR HAS
COMPLETELY COOLED DOWN TO PREVENT BURNS.
Warning
Read instruction manual
V
Volts
W
Watts
dc
Direct current
mA
Milliamperes
Indoor use only
Electrical Emissions
Conformity (EMC)
SPARE PARTS
Spare parts can be ordered from the Special Orders Desk
at your local Bunnings Warehouse.
For further information, or any parts not listed here, visit
www.ozito.com.au or contact Ozito Customer Service:
Australia 1800 069 486
New Zealand 0508 069 486
E-mail: [email protected]
