AGL-9100U
4. ON/OFF SWITCH
5. GRINDING & CUTTING
The tool is recommended for use with a residual current
device with a rated residual current of 30mA or less.
3a.
For grinding
The optimum angle is 10-15
°
to the workpiece. Do not apply
excessive pressure. Allow the tool to do the work. This will
prevent deep gouging.
1. To turn the grinder on, first push safety lock off switch forward,
then depress trigger switch. Hold the trigger switch in this
position for continuous use.
2. To turn the grinder off, release the trigger switch.
Note:
The grinder is fitted with a soft-start switch for added
safety.
a
b
10-15°
3b.
For cutting
The optimum angle is 90
°
to
the workpiece. Do not apply
excessive pressure. Allow
the tool to do the work.
1. Ensure the workpiece is
securely held down.
2. Turn on the angle
grinder.
a
b
CAUTION:
REGULARLY CHECK THAT THE OUTER
FLANGE HAS NOT BECOME LOOSE DURING
OPERATION.