Connecting To An Air Compressor
WARNING!
ENSURE THE AIR COMPRESSOR IS
TURNED OFF AND DISCONNECTED FROM THE
POWER SUPPLY BEFORE PERFORMING ANY OF
THE FOLLOWING OPERATIONS.
Ensure that there is a female Nitto connector on the air compressor
outlet.
1. Pull back the sleeve on the
female Nitto connector and
insert the connecting hose.
2. Release the sleeve; the Nitto
coupling should click into
place.
3. Check that the fitting is secure by tugging gently on the connecting
hose. If the hose detaches, repeat steps 1 and 2, pushing the Nitto
fitting firmly into the outlet.
Connecting Air Tools & Accessories
A male Nitto connector will need to be fitted to any air tool or
accessory you wish to connect.
1. Pull back the sleeve of the
Nitto Connector on the air
hose.
2. Insert the Nitto connector
on the air tool/accessory.
Release the sleeve; the Nitto
coupling should click into
place.
3. Check that the fitting is secure by tugging gently on the air hose. If
the hose detaches, repeat steps 1 and 2, pushing the Nitto fitting
firmly into the outlet.
Extending The Air Hose
The air hose will make a grating sound and lock at regular intervals
as you extend it.
1. Pull gently but firmly on the air
hose to unwind it.
WARNING!
ENSURE THE GRATING SOUND IS
HEARD AND THE AIR HOSE HAS REACHED ONE OF
ITS LOCKING INTERVALS BEFORE RELEASING THE
HOSE, OTHERWISE IT MAY RETRACT RAPIDLY AND
WHIP ABOUT.
Retracting The Air Hose
1. Disconnect any air tool or accessory from the end of the air hose.
2. Tug gently but firmly on the air
hose until the grating sound
is heard again to release the
interval lock.
3. Maintain a firm grip on the air
hose and steadily feed it back
into the reel.
WARNING!
DO NOT LET GO OF THE HOSE WHILE IT
IS RETRACTING, AS THIS CAN CAUSE THE END OF
THE HOSE TO WHIP ABOUT AND CAUSE INJURY OR
DAMAGE.
2. ATTACHING TOOLS
3. USING THE HOSE REEL
OPERATION
9M RETRACTABLE AIR HOSE REEL
a.
b.
9M RETRACTABLE AIR HOSE REEL
9M RETRACTABLE AIR HOSE REEL
AAHR-090
