background image

GB

- 8 -

Danger! 

Read the operating instructions to reduce the risk of inquiry

Caution! Wear ear-mu

 s.

 The impact of noise can cause damage to hearing.

Caution! Wear safety goggles. 

Sparks generated during working or splinters, chips and dust emitted 

by the device can cause loss of sight.

Caution! Wear a breathing mask. 

Dust which is injurious to health can be generated when working on 

wood and other materials. Never use the device to work on any materials containing asbestos!

Warning! 

The adjustable stop rails are secured by hex screws.

To make miter cuts (with the saw head inclined or the turntable set at an angle), the adjustable stop rails 

must be 

fi

 xed at an outer position.

For 45° crosscuts to the left, the left stop rail must be pushed outwards and  screwed tight.

For 45° crosscuts to the right, the right-hand removable stop rail must be removed in upwards direction.

To make 90° crosscuts, the adjustable stops rail must be 

fi

 xed at the inner position!

Caution! Risk of injury! 

Do not reach into the running saw blade.

Anl_SCMS_2125U_SPK7.indb   8

Anl_SCMS_2125U_SPK7.indb   8

02.12.2019   11:25:11

02.12.2019   11:25:11

Summary of Contents for 43.008.16





























Reviews: