background image

EGR-2050U

ELECTRIC ENGRAVER

15W

WARRANTY

OZITO UK

 

Unit 9 Stadium Court, Wirral International Business Park, Plantation Road, Bromborough, 

Wirral, CH62 3QG

0816

ORIGINAL INSTRUCTIONS

SPECIFICATIONS

Voltage: 

 

230-240V ~ 50Hz

Power: 

 

15W (S2: 30min)

No Load Speed: 

6,000/min

Accessory Diameter:  3mm

WHAT’S IN THE BOX

Electric Engraver

Stencil x 2 and Hex Key

ozito-diy.co.uk

All of our products undergo strict quality checks to ensure that they reach you in perfect condition. 

In the unlikely event that your device develops a fault, please contact our service department at the 

address shown on this guarantee card. You can also contact us by telephone using the customer 

service number shown. Please note the following terms under which guarantee claims can be 

made:
1. These warranty terms regulate additional warranty services, which the manufacturer mentioned 

below promises to buyers of its new products in addition to their statutory guarantee claims are not 

affected by this guarantee. Our guarantee is free of charge to you.
2. The warranty services only covers defects due to material or manufacturing faults on a product 

which you have bought from the manufacturer mentioned below are limited to either the rectification 

of said defects on the product or the replacement of the product, whichever we prefer. 

Please note that our devices are not designed for use in commercial, trade or professional 

applications. A guarantee contract will not be created if the device has been used by commercial, 

trade or industrial business or has been exposed to similar stresses during the guarantee period.
3. The following are not covered by our guarantee: 

- Damage to the device caused by a failure to follow the assembly instructions or due to incorrect 

installation, a failure to follow the operating instructions (for example connecting it to an incorrect 

mains voltage or current type) or a failure to follow the maintenance and safety instructions or by 

exposing the device to abnormal environmental conditions or by lack of care and maintenance. 

- Damage to the device caused by abuse or incorrect use (for example overloading the device or 

the use or unapproved tools or accessories), ingress of foreign bodies into the device (such as 

sand, stones or dust, transport damage), the use of force or damage caused by external forces (for 

example by dropping it). 

- Damage to the device or parts of the device caused by normal or natural wear or tear or by normal 

use of the device.
4. Your Product is guaranteed for a period of 36 months from the original date of purchase and 

is intended for DIY (Do It Yourself) use only. Lithium Ion batteries and chargers are covered by a 

12 month warranty. Warranty excludes consumable parts. Guarantee claims should be submitted 

before the end of the guarantee period within two weeks of the defect being noticed. No guarantee 

claims will be accepted after the end of the guarantee period. The original guarantee period 

remains applicable to the device even if repairs are carried out or parts are replaced. In such cases, 

the work performed or parts fitted will not result in an extension of the guarantee period, and no 

new guarantee will become active for the work performed or parts fitted. This also applies if an 

on-site service is used. 

IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY YOU MUST RETURN THE PRODUCT TO 

THE PLACE OF PURCHASE WITH YOUR REGISTER RECEIPT.
Please refer to the restrictions of this warranty concerning wearing parts, consumables and missing 

parts as set out in the service information in these operating instructions. 
CUSTOMER SERVICE HELPLINE 

GB: 0151 294 4488 

IRL: 1850 882711 

Ozito-diy.co.uk

Summary of Contents for 15W









Reviews:

Related manuals for 15W